User Manual
Table Of Contents
- Table of contents
- Introduction
- Controls and functions
- Overview of screens
- HOME screen
- DAW REMOTE screen
- Channel-specific screens
- Other fixed display areas
- MAINTENANCE screen
- Operating Screens
- SCENE screen
- RECORDER screen
- MONITOR screen
- SETUP screen
- LOGIN screen
- HOME screen
- DAW REMOTE screen
- Channel-specific screens
- Adjusting EQ in manual mode
- Adjusting EQ in 1-knob mode
- Configuring the HPF
- Configuring GATE/DUCKING
- Adjusting the compressor in manual mode
- Adjusting the compressor in 1-knob mode
- Setting effects
- Adjusting the send to MIX/MATRIX BUS level
- Setting the send to FX BUS level
- Adjusting the send to FX/MIX/MATRIX BUS level with faders
- Using GEQ
- Using faders to adjust GEQ
- Configuring mute safe
- Setting the send levels from output channels (MIX, STEREO) to MATRIX
- Recall presets
- Editing presets
- MAINTENANCE screen
- DM3 Editor
- Using the Editor
- Appendix
The types of icons are shown below.
Making settings
Settings complete
Timed out
Settings error
NOTE
The Tio1608-D does not support connections at a reader clock frequency of 96 kHz. If the DM3 reader clock frequency is 96 kHz and the
Tio1608-D is shown in the target devices, a dialog box will appear asking if the reader clock frequency should be changed to 48 kHz.
Touch the OK button to set the DM3 reader clock to 48 kHz.
Related links
(
“Dante Auto Setup compatible model”(p.339)
(
“Dante Auto Setup patches”(p.340)
120
Screen functions and names > SETUP screen