User Manual
Table Of Contents
- Table of contents
- Introduction
- Controls and functions
- Overview of screens
- HOME screen
- DAW REMOTE screen
- Channel-specific screens
- Other fixed display areas
- MAINTENANCE screen
- Operating Screens
- SCENE screen
- RECORDER screen
- MONITOR screen
- SETUP screen
- LOGIN screen
- HOME screen
- DAW REMOTE screen
- Channel-specific screens
- Adjusting EQ in manual mode
- Adjusting EQ in 1-knob mode
- Configuring the HPF
- Configuring GATE/DUCKING
- Adjusting the compressor in manual mode
- Adjusting the compressor in 1-knob mode
- Setting effects
- Adjusting the send to MIX/MATRIX BUS level
- Setting the send to FX BUS level
- Adjusting the send to FX/MIX/MATRIX BUS level with faders
- Using GEQ
- Using faders to adjust GEQ
- Configuring mute safe
- Setting the send levels from output channels (MIX, STEREO) to MATRIX
- Recall presets
- Editing presets
- MAINTENANCE screen
- DM3 Editor
- Using the Editor
- Appendix
c
Device Information display
Displays information on the device selected in the Patch Device list.
System/Sync indicators:
Displays the Dante status of the device.
When there is an error, warning or information, its icon is displayed in the indicator.
Touch the indicator to display the message at the bottom of the screen.
+48V Active indicator:
Displays +48V Active information for the device.
It also displays the model name and version number.
d
Identify button
The LED of the connected device lights as long as this button is touched.
NOTE
(
When there is System/Sync error, warning or information with the connected device, a red ▲ icon is displayed on the right side of
the device's icon.
(
Remote HA compatible devices are listed below.
(
Tio1608-D
(
Rio1608-D
(
Rio3224-D
(
Rio1608-D2
(
Rio3224-D2
(
Ri8-D
(
DM3
122
Screen functions and names > SETUP screen