User Manual
Table Of Contents
- Table of contents
- Introduction
- Controls and functions
- Overview of screens
- HOME screen
- DAW REMOTE screen
- Channel-specific screens
- Other fixed display areas
- MAINTENANCE screen
- Operating Screens
- SCENE screen
- RECORDER screen
- MONITOR screen
- SETUP screen
- LOGIN screen
- HOME screen
- DAW REMOTE screen
- Channel-specific screens
- Adjusting EQ in manual mode
- Adjusting EQ in 1-knob mode
- Configuring the HPF
- Configuring GATE/DUCKING
- Adjusting the compressor in manual mode
- Adjusting the compressor in 1-knob mode
- Setting effects
- Adjusting the send to MIX/MATRIX BUS level
- Setting the send to FX BUS level
- Adjusting the send to FX/MIX/MATRIX BUS level with faders
- Using GEQ
- Using faders to adjust GEQ
- Configuring mute safe
- Setting the send levels from output channels (MIX, STEREO) to MATRIX
- Recall presets
- Editing presets
- MAINTENANCE screen
- DM3 Editor
- Using the Editor
- Appendix
MIX 1-6 and MATRIX 1-2
Following is a description of the CH STRIP section of the MIX 1-6 and MATRIX 1-2 channels.
a
b
c
d
e
f
g
h
a
Displays the SEND FROM screen. (p.219)
b
Displays the EQ screen. (p.176)
c
Displays the GEQ screen. (p.211)
d
Displays the DYN2 screen. (p.184)
e
Displays the DELAY screen. (p.187)
f
Displays the SEND TO screen. (p.193)
g
Displays the OUTPUT screen. (p.214)
h
Displays the CH VIEW screen. (p.197)
162
HOME screen > CH STRIP section