User Manual
Table Of Contents
- Table of contents
- Introduction
- Controls and functions
- Overview of screens
- HOME screen
- DAW REMOTE screen
- Channel-specific screens
- Other fixed display areas
- MAINTENANCE screen
- Operating Screens
- SCENE screen
- RECORDER screen
- MONITOR screen
- SETUP screen
- LOGIN screen
- HOME screen
- DAW REMOTE screen
- Channel-specific screens
- Adjusting EQ in manual mode
- Adjusting EQ in 1-knob mode
- Configuring the HPF
- Configuring GATE/DUCKING
- Adjusting the compressor in manual mode
- Adjusting the compressor in 1-knob mode
- Setting effects
- Adjusting the send to MIX/MATRIX BUS level
- Setting the send to FX BUS level
- Adjusting the send to FX/MIX/MATRIX BUS level with faders
- Using GEQ
- Using faders to adjust GEQ
- Configuring mute safe
- Setting the send levels from output channels (MIX, STEREO) to MATRIX
- Recall presets
- Editing presets
- MAINTENANCE screen
- DM3 Editor
- Using the Editor
- Appendix
c
CHANNEL STRIP section
This part corresponds to the channel module of a conventional analog mixer. It is for operating the main parameters
of the currently selected channel. (p.19)
d
[MAIN] section
This section is primarily for operating the STEREO channel. (p.20)
e
[USER DEFINED KEYS] section
Keys that operate functions assigned at the discretion of the user. A number of frequently used functions, such as tap
tempo, bookmarks, etc., are assigned by default. (p.22)
f
[HOME] key
Returns to the HOME screen. (p.23)
g
[FADER BANK] section
Switches the faders assigned to the panel. (p.21)
h
[PHONES] section
For monitoring the signal selected with MONITOR select, or the CUE signal via headphones. (p.24)
i
USB connector
This connector is for connecting a USB storage device. (p.25)
17
Controls and functions > Top panel