User Manual
Table Of Contents
- Table of contents
- Introduction
- Controls and functions
- Overview of screens
- HOME screen
- DAW REMOTE screen
- Channel-specific screens
- Other fixed display areas
- MAINTENANCE screen
- Operating Screens
- SCENE screen
- RECORDER screen
- MONITOR screen
- SETUP screen
- LOGIN screen
- HOME screen
- DAW REMOTE screen
- Channel-specific screens
- Adjusting EQ in manual mode
- Adjusting EQ in 1-knob mode
- Configuring the HPF
- Configuring GATE/DUCKING
- Adjusting the compressor in manual mode
- Adjusting the compressor in 1-knob mode
- Setting effects
- Adjusting the send to MIX/MATRIX BUS level
- Setting the send to FX BUS level
- Adjusting the send to FX/MIX/MATRIX BUS level with faders
- Using GEQ
- Using faders to adjust GEQ
- Configuring mute safe
- Setting the send levels from output channels (MIX, STEREO) to MATRIX
- Recall presets
- Editing presets
- MAINTENANCE screen
- DM3 Editor
- Using the Editor
- Appendix
DELAY screen
The DELAY screen sets the delay for signals outputted from the MIX, MATRIX and STEREO channels, and the
delay for signals inputted to the INPUT and ST IN IN channel.
a b
c
d
a
DELAY button
Turns the DELAY ON/OFF.
b
LR Link button
It links the operation of DELAY ON/OFF and the delay time. If the delay time is set to a different value, the delay time
is linked while maintaining the difference.
Selected channels are displayed for stereo channels.
c
DELAY setting text box
Delay can be specified by sample, frame, meter, feet or ms. Touch when selected to open the screen for entering
numeric values.
d
DELAY slider
Allows you to set the delay time.
Delay time can be displayed in units of sample, frame, meter, feet or ms.
n
DELAY screen menu
Swipe left on the menu swipe indicator on the right of the DELAY screen to open the following menu.
187
Channel-specific screens > DELAY screen