User Manual
Table Of Contents
- Table of contents
- Introduction
- Controls and functions
- Overview of screens
- HOME screen
- DAW REMOTE screen
- Channel-specific screens
- Other fixed display areas
- MAINTENANCE screen
- Operating Screens
- SCENE screen
- RECORDER screen
- MONITOR screen
- SETUP screen
- LOGIN screen
- HOME screen
- DAW REMOTE screen
- Channel-specific screens
- Adjusting EQ in manual mode
- Adjusting EQ in 1-knob mode
- Configuring the HPF
- Configuring GATE/DUCKING
- Adjusting the compressor in manual mode
- Adjusting the compressor in 1-knob mode
- Setting effects
- Adjusting the send to MIX/MATRIX BUS level
- Setting the send to FX BUS level
- Adjusting the send to FX/MIX/MATRIX BUS level with faders
- Using GEQ
- Using faders to adjust GEQ
- Configuring mute safe
- Setting the send levels from output channels (MIX, STEREO) to MATRIX
- Recall presets
- Editing presets
- MAINTENANCE screen
- DM3 Editor
- Using the Editor
- Appendix
FX BUS 1-2
Following is a description of the CH VIEW screen for FX BUS 1-2 channels.
a cb
d fe
a
Channel name
Touch to display the CH NAME screen.
Touch the left/right buttons to display information for a different channel.
b
Recall Safe button
Touch to turn recall safe ON/OFF for that channel.
Touch the jump button on the right of the Recall Safe button to open the RECALL SAFE screen.
c
Channel ON/OFF button
Turns the displayed channel ON/OFF.
d
Boxes
Touch while selected to open the configuration screen for the corresponding feature.
(
FROM box:
Displays the SEND FROM screen.
(
FX box:
Displays the FX screen.
e
Channel output level meter
Displays the channel's output level.
203
Channel-specific screens > CH VIEW screen