User Manual
Table Of Contents
- Table of contents
- Introduction
- Controls and functions
- Overview of screens
- HOME screen
- DAW REMOTE screen
- Channel-specific screens
- Other fixed display areas
- MAINTENANCE screen
- Operating Screens
- SCENE screen
- RECORDER screen
- MONITOR screen
- SETUP screen
- LOGIN screen
- HOME screen
- DAW REMOTE screen
- Channel-specific screens
- Adjusting EQ in manual mode
- Adjusting EQ in 1-knob mode
- Configuring the HPF
- Configuring GATE/DUCKING
- Adjusting the compressor in manual mode
- Adjusting the compressor in 1-knob mode
- Setting effects
- Adjusting the send to MIX/MATRIX BUS level
- Setting the send to FX BUS level
- Adjusting the send to FX/MIX/MATRIX BUS level with faders
- Using GEQ
- Using faders to adjust GEQ
- Configuring mute safe
- Setting the send levels from output channels (MIX, STEREO) to MATRIX
- Recall presets
- Editing presets
- MAINTENANCE screen
- DM3 Editor
- Using the Editor
- Appendix
Other fixed display areas
SENDS ON FADER area
Using the SENDS ON FADER area allows you manage each channel strip on the panel and adjust send levels
and turn sends to specific buses ON/OFF temporarily.
SENDS ON FADER buttons
Switch the SENDS ON FADER mode to the selected bus. The selected button is highlighted. Pressing it again
turns the CUE of the selected bus ON. Press Exit to return to the normal mode.
Related links
“Adjusting the send to MIX/MATRIX BUS level”(p.281)
225
Other fixed display areas > SENDS ON FADER area