User Manual
Table Of Contents
- Table of contents
- Introduction
- Controls and functions
- Overview of screens
- HOME screen
- DAW REMOTE screen
- Channel-specific screens
- Other fixed display areas
- MAINTENANCE screen
- Operating Screens
- SCENE screen
- RECORDER screen
- MONITOR screen
- SETUP screen
- LOGIN screen
- HOME screen
- DAW REMOTE screen
- Channel-specific screens
- Adjusting EQ in manual mode
- Adjusting EQ in 1-knob mode
- Configuring the HPF
- Configuring GATE/DUCKING
- Adjusting the compressor in manual mode
- Adjusting the compressor in 1-knob mode
- Setting effects
- Adjusting the send to MIX/MATRIX BUS level
- Setting the send to FX BUS level
- Adjusting the send to FX/MIX/MATRIX BUS level with faders
- Using GEQ
- Using faders to adjust GEQ
- Configuring mute safe
- Setting the send levels from output channels (MIX, STEREO) to MATRIX
- Recall presets
- Editing presets
- MAINTENANCE screen
- DM3 Editor
- Using the Editor
- Appendix
Setting the fade time for a scene
You can edit the fader time of saved scenes.
This is for setting the time it takes to change the volume setting when changing a scene.
1 Select the scene to reconfigure its fade time.
2 Touch the Edit button.
A screen opens for editing the title, comments and fade time.
3 To turn the fade time on, touch the Fade Time button. Touch it again to turn it off.
4 To set the fade time, touch the Fade Time display and input the setting with the
keyboard.
It can also be set with the [TOUCH AND TURN] knob.
5 To turn the fade time ON/OFF for each channel, touch the button on the right side.
241
Operating Screens > SCENE screen