User Manual
Table Of Contents
- Table of contents
- Introduction
- Controls and functions
- Overview of screens
- HOME screen
- DAW REMOTE screen
- Channel-specific screens
- Other fixed display areas
- MAINTENANCE screen
- Operating Screens
- SCENE screen
- RECORDER screen
- MONITOR screen
- SETUP screen
- LOGIN screen
- HOME screen
- DAW REMOTE screen
- Channel-specific screens
- Adjusting EQ in manual mode
- Adjusting EQ in 1-knob mode
- Configuring the HPF
- Configuring GATE/DUCKING
- Adjusting the compressor in manual mode
- Adjusting the compressor in 1-knob mode
- Setting effects
- Adjusting the send to MIX/MATRIX BUS level
- Setting the send to FX BUS level
- Adjusting the send to FX/MIX/MATRIX BUS level with faders
- Using GEQ
- Using faders to adjust GEQ
- Configuring mute safe
- Setting the send levels from output channels (MIX, STEREO) to MATRIX
- Recall presets
- Editing presets
- MAINTENANCE screen
- DM3 Editor
- Using the Editor
- Appendix
Patching in/output
This explains how to configure IN/OUT patches
n
Input/output patches
Configure patches from the SETUP → PATCH screen.
Input patches can also be configured via the INPUT → INPUT CH PATCH screen. Output patches can also be
configured via the OUTPUT → OUTPUT CH PATCH screen.
n
Patching the DM3 and I/O devices
There are 2 kinds of patches between the DM3 and I/O devices--patches to the Dante audio network or to the
DM3 internal mixer.
Use the DANTE PATCH screen for making patches the DM3 to I/O devices in the Dante audio network.
Related links
(
“PATCH screen”(p.107)
(
“INPUT CH PATCH screen”(p.174)
(
“OUTPUT CH PATCH screen”(p.217)
(
“DANTE PATCH screen”(p.112)
(
“Dante Auto Setup patches”(p.340)
(
“Default values of IN/OUT patches”(p.341)
258
Operating Screens > SETUP screen