User Manual
Table Of Contents
- Table of contents
- Introduction
- Controls and functions
- Overview of screens
- HOME screen
- DAW REMOTE screen
- Channel-specific screens
- Other fixed display areas
- MAINTENANCE screen
- Operating Screens
- SCENE screen
- RECORDER screen
- MONITOR screen
- SETUP screen
- LOGIN screen
- HOME screen
- DAW REMOTE screen
- Channel-specific screens
- Adjusting EQ in manual mode
- Adjusting EQ in 1-knob mode
- Configuring the HPF
- Configuring GATE/DUCKING
- Adjusting the compressor in manual mode
- Adjusting the compressor in 1-knob mode
- Setting effects
- Adjusting the send to MIX/MATRIX BUS level
- Setting the send to FX BUS level
- Adjusting the send to FX/MIX/MATRIX BUS level with faders
- Using GEQ
- Using faders to adjust GEQ
- Configuring mute safe
- Setting the send levels from output channels (MIX, STEREO) to MATRIX
- Recall presets
- Editing presets
- MAINTENANCE screen
- DM3 Editor
- Using the Editor
- Appendix
Configuring GATE/DUCKING
This explains how to configure GATE/DUCKING.
1 Open the DYN1 screen.
2 Touch the DYN1 button to turn it ON.
3 Select Type, Key In.
4 Touch the on-screen slider that you want to adjust.
5 Turn the [TOUCH AND TURN] knob to adjust the value.
Refer to the gate graph and each meter while making adjustments.
You can also drag the slider on the touchscreen to adjust the setting.
Related links
“DYN1 (GATE/DUCKING) screen”(p.181)
276
Operating Screens > Channel-specific screens