User Manual
Table Of Contents
- Table of contents
- Introduction
- Controls and functions
- Overview of screens
- HOME screen
- DAW REMOTE screen
- Channel-specific screens
- Other fixed display areas
- MAINTENANCE screen
- Operating Screens
- SCENE screen
- RECORDER screen
- MONITOR screen
- SETUP screen
- LOGIN screen
- HOME screen
- DAW REMOTE screen
- Channel-specific screens
- Adjusting EQ in manual mode
- Adjusting EQ in 1-knob mode
- Configuring the HPF
- Configuring GATE/DUCKING
- Adjusting the compressor in manual mode
- Adjusting the compressor in 1-knob mode
- Setting effects
- Adjusting the send to MIX/MATRIX BUS level
- Setting the send to FX BUS level
- Adjusting the send to FX/MIX/MATRIX BUS level with faders
- Using GEQ
- Using faders to adjust GEQ
- Configuring mute safe
- Setting the send levels from output channels (MIX, STEREO) to MATRIX
- Recall presets
- Editing presets
- MAINTENANCE screen
- DM3 Editor
- Using the Editor
- Appendix
Using GEQ
This explains how to operate the GEQ.
1 Open the GEQ screen.
2 Touch the GEQ button to turn it ON.
3 Swipe left or right on the gain sliders to display the desired frequency.
4 Drag sliders up/down to adjust their gain.
You can confirm gain levels via the gain output level meter.
Once you have adjusted gain for 15 bands, the gain sliders for the remaining bands are
displayed in gray. If you want adjust gain for other bands, you must first set the gain to 0 for
one of the bands you have already adjusted.
Touch the gain slider quickly two times to reset it to 0 dB (default value).
The selected gain slider can also be adjusted with the [TOUCH AND TURN] knob.
Related links
“GEQ screen”(p.211)
286
Operating Screens > Channel-specific screens