User Manual
Table Of Contents
- Table of contents
- Introduction
- Controls and functions
- Overview of screens
- HOME screen
- DAW REMOTE screen
- Channel-specific screens
- Other fixed display areas
- MAINTENANCE screen
- Operating Screens
- SCENE screen
- RECORDER screen
- MONITOR screen
- SETUP screen
- LOGIN screen
- HOME screen
- DAW REMOTE screen
- Channel-specific screens
- Adjusting EQ in manual mode
- Adjusting EQ in 1-knob mode
- Configuring the HPF
- Configuring GATE/DUCKING
- Adjusting the compressor in manual mode
- Adjusting the compressor in 1-knob mode
- Setting effects
- Adjusting the send to MIX/MATRIX BUS level
- Setting the send to FX BUS level
- Adjusting the send to FX/MIX/MATRIX BUS level with faders
- Using GEQ
- Using faders to adjust GEQ
- Configuring mute safe
- Setting the send levels from output channels (MIX, STEREO) to MATRIX
- Recall presets
- Editing presets
- MAINTENANCE screen
- DM3 Editor
- Using the Editor
- Appendix
(
Save :
Saves the current settings by overwriting the existing .DM3F file.
(
Save As :
Allows you to save the current settings as a newly named .DM3F file.
(
Manage Library/Scene :
Displays the Manage Library/Scene screen which allows the batch management of library and Scene data
within the DM3 Editor.
This feature cannot be used during ONLINE connection with the DM3 Series console.
(
Ch Names :
Displays the Ch Names screen used for setting up the icon, name and color of the input channel and
output channel.
(
Initialize Memory :
This feature cannot be used during ONLINE connection with the DM3 Series console.
(
Current Memory :
Initializes the current memory of the DM3 Editor.
The following data is initialized: mixing data and setup data.
(
All Memory :
Initializes the internal memory of the DM3 Editor.
The following data is initialized: all Scene data, all Preset data, mixing data, and setup data.
(
Exit
Closes the DM3 Editor.
301
DM3 Editor > Menu bar