User Manual
Table Of Contents
- Table of contents
- Introduction
- Controls and functions
- Overview of screens
- HOME screen
- DAW REMOTE screen
- Channel-specific screens
- Other fixed display areas
- MAINTENANCE screen
- Operating Screens
- SCENE screen
- RECORDER screen
- MONITOR screen
- SETUP screen
- LOGIN screen
- HOME screen
- DAW REMOTE screen
- Channel-specific screens
- Adjusting EQ in manual mode
- Adjusting EQ in 1-knob mode
- Configuring the HPF
- Configuring GATE/DUCKING
- Adjusting the compressor in manual mode
- Adjusting the compressor in 1-knob mode
- Setting effects
- Adjusting the send to MIX/MATRIX BUS level
- Setting the send to FX BUS level
- Adjusting the send to FX/MIX/MATRIX BUS level with faders
- Using GEQ
- Using faders to adjust GEQ
- Configuring mute safe
- Setting the send levels from output channels (MIX, STEREO) to MATRIX
- Recall presets
- Editing presets
- MAINTENANCE screen
- DM3 Editor
- Using the Editor
- Appendix
Setup menu
The Setup menu is for configuring the environment for using DM3 Editor.
When you select an item, it is checked and the function is enabled. Select the item again to remove the
checkmark and disable the feature.
(
Channel Select Link :
When synced with the DM3 series console, this determines whether to sync the channel selection with the
console.
(
Network Interface :
Allows you to select the network port used for communication between your computer and the DM3 series
console.
What is displayed here varies the usage environment.
(
Confirmation :
Determines whether a confirmation dialog is displayed when you use Store, Recall, INPUT Patch or
OUTPUT Patch functions.
When checked, the confirmation dialog is enabled.
(
Display Delay Scale :
The unit of delay displayed in the DELAY box can be set to sample, frame, meter, feet or ms.
(
Frame Rate :
Selects the frame rate for the delay setting in the frame unit.
(
Home Button Function :
Selects the section to display when the HOME button is clicked. When “CH STRIP & Selected Channel” is
selected, each time the HOME button is clicked, the display switches between the CH STRIP section and
the Selected Channel section.
308
DM3 Editor > Menu bar