User Manual
Table Of Contents
- Table of contents
- Introduction
- Controls and functions
- Overview of screens
- HOME screen
- DAW REMOTE screen
- Channel-specific screens
- Other fixed display areas
- MAINTENANCE screen
- Operating Screens
- SCENE screen
- RECORDER screen
- MONITOR screen
- SETUP screen
- LOGIN screen
- HOME screen
- DAW REMOTE screen
- Channel-specific screens
- Adjusting EQ in manual mode
- Adjusting EQ in 1-knob mode
- Configuring the HPF
- Configuring GATE/DUCKING
- Adjusting the compressor in manual mode
- Adjusting the compressor in 1-knob mode
- Setting effects
- Adjusting the send to MIX/MATRIX BUS level
- Setting the send to FX BUS level
- Adjusting the send to FX/MIX/MATRIX BUS level with faders
- Using GEQ
- Using faders to adjust GEQ
- Configuring mute safe
- Setting the send levels from output channels (MIX, STEREO) to MATRIX
- Recall presets
- Editing presets
- MAINTENANCE screen
- DM3 Editor
- Using the Editor
- Appendix
Parameter Range Description
Delay L 1.0 - 1350.0 ms Left channel delay time.
Delay R 1.0 - 1350.0 ms Right channel delay time.
Feedback Gain L -99 - +99 Left channel feedback amount.
Feedback Gain R -99 - +99 Right channel feedback amount.
High Ratio 0.1 - 1.0 Amount of high-frequency feedback.
HPF Thru, 21.2 Hz - 8.00 kHz High-pass filter cutoff frequency.
LPF 50.0 Hz - 16.0 kHz, Thru Low-pass filter cutoff frequency.
Sync OFF, ON Tempo parameter sync ON/OFF.
Note L ----, *1 - *14 Value used to calculate DELAY L based on the tempo.
Note R ----, *1 - *14 Value used to calculate DELAY R based on the tempo.
DELAY LCR
1 IN/2 OUT 3-tap delay.
Parameter Range Description
Delay L 1.0 - 2700.0 ms Left channel delay time.
Delay C 1.0 - 2700.0 ms Center channel delay time.
Delay R 1.0 - 2700.0 ms Left channel delay time.
Delay FB 1.0 - 2700.0 ms Feedback delay time.
Feedback Gain -99 - +99 Amount of feedback.
High Ratio 0.1 - 1.0 Amount of high-frequency feedback.
HPF Thru, 21.2 Hz - 8.00 kHz High-pass filter cutoff frequency.
LPF 50.0 Hz - 16.0 kHz, Thru Low-pass filter cutoff frequency.
Level L -100 - +100 Left channel level.
Level C -100 - +100 Center channel level.
Level R -100 - +100 Right channel level.
Sync OFF, ON Tempo parameter sync ON/OFF.
Note L ----, *1 - *14 Value used to calculate DELAY L based on the tempo.
Note C ----, *1 - *14 Value used to calculate DELAY C based on the tempo.
Note R ----, *1 - *14 Value used to calculate DELAY R based on the tempo.
Note FB ----, *1 - *14 Value used to calculate DELAY FB based on the tempo.
ECHO
2 IN/2 OUT stereo delay with a crossed feedback loop.
334
Appendix > Parameters