User Manual
Table Of Contents
- Table of contents
- Introduction
- Controls and functions
- Overview of screens
- HOME screen
- DAW REMOTE screen
- Channel-specific screens
- Other fixed display areas
- MAINTENANCE screen
- Operating Screens
- SCENE screen
- RECORDER screen
- MONITOR screen
- SETUP screen
- LOGIN screen
- HOME screen
- DAW REMOTE screen
- Channel-specific screens
- Adjusting EQ in manual mode
- Adjusting EQ in 1-knob mode
- Configuring the HPF
- Configuring GATE/DUCKING
- Adjusting the compressor in manual mode
- Adjusting the compressor in 1-knob mode
- Setting effects
- Adjusting the send to MIX/MATRIX BUS level
- Setting the send to FX BUS level
- Adjusting the send to FX/MIX/MATRIX BUS level with faders
- Using GEQ
- Using faders to adjust GEQ
- Configuring mute safe
- Setting the send levels from output channels (MIX, STEREO) to MATRIX
- Recall presets
- Editing presets
- MAINTENANCE screen
- DM3 Editor
- Using the Editor
- Appendix
Star connections
Star connection refers to a method of connecting devices with a network switch in the middle. It can be used
for a large network that requires a wide bandwidth by using a network switch that supports a Gigabyte
Ethernet network switch. We recommend having various network switch functions (such as clock
synchronization of any data line, or QoS that prioritizes voice transmission) for the purpose of controlling
and monitoring the network.
n
Example of connection of AUTO SETUP DM3 and I/O device
Make connections as follows using the Dante connector of an I/O device with the DM3.
PRIMARY
PRIMARY
PRIMARY
Tio1608-D
(UNIT ID:Y001)
PRIMARY
DM3
DZR
(UNIT ID:Y001)
1
1
DZR
(UNIT ID:Y002)
Network switch
FX/MON OUTPUT
MAIN
36
Connections > Dante Network Connections