User Manual
Table Of Contents
- Table of contents
- Introduction
- Controls and functions
- Overview of screens
- HOME screen
- DAW REMOTE screen
- Channel-specific screens
- Other fixed display areas
- MAINTENANCE screen
- Operating Screens
- SCENE screen
- RECORDER screen
- MONITOR screen
- SETUP screen
- LOGIN screen
- HOME screen
- DAW REMOTE screen
- Channel-specific screens
- Adjusting EQ in manual mode
- Adjusting EQ in 1-knob mode
- Configuring the HPF
- Configuring GATE/DUCKING
- Adjusting the compressor in manual mode
- Adjusting the compressor in 1-knob mode
- Setting effects
- Adjusting the send to MIX/MATRIX BUS level
- Setting the send to FX BUS level
- Adjusting the send to FX/MIX/MATRIX BUS level with faders
- Using GEQ
- Using faders to adjust GEQ
- Configuring mute safe
- Setting the send levels from output channels (MIX, STEREO) to MATRIX
- Recall presets
- Editing presets
- MAINTENANCE screen
- DM3 Editor
- Using the Editor
- Appendix
Overview of screens
Breakdown of screens
The display of the console can be broadly divided into 5 areas.
c da
e
b
a
Tool bar (p.52)
b
Main area
c
SENDS ON FADER area (p.225)
d
ADMIN area (p.226)
e
Channel Name area (p.227)
n
Content displayed in main area
What is displayed in the main area changes according to what icons and/or channels are selected.
The channel setting status is displayed all together on the HOME screen. (p.145)
The HOME screen has 3 types of screen, which are displayed in units of 8 channels, or of 1 channel.
The display changes each time [HOME] key/HOME button is pressed.
41
Overview of screens > Breakdown of screens