User Manual
Table Of Contents
- Table of contents
- Introduction
- Controls and functions
- Overview of screens
- HOME screen
- DAW REMOTE screen
- Channel-specific screens
- Other fixed display areas
- MAINTENANCE screen
- Operating Screens
- SCENE screen
- RECORDER screen
- MONITOR screen
- SETUP screen
- LOGIN screen
- HOME screen
- DAW REMOTE screen
- Channel-specific screens
- Adjusting EQ in manual mode
- Adjusting EQ in 1-knob mode
- Configuring the HPF
- Configuring GATE/DUCKING
- Adjusting the compressor in manual mode
- Adjusting the compressor in 1-knob mode
- Setting effects
- Adjusting the send to MIX/MATRIX BUS level
- Setting the send to FX BUS level
- Adjusting the send to FX/MIX/MATRIX BUS level with faders
- Using GEQ
- Using faders to adjust GEQ
- Configuring mute safe
- Setting the send levels from output channels (MIX, STEREO) to MATRIX
- Recall presets
- Editing presets
- MAINTENANCE screen
- DM3 Editor
- Using the Editor
- Appendix
METER screen
While on the METER screen, the IN/OUT levels of all channels can be displayed and the metering point (point
to detect levels) of level meters can be switched.
d e
a
b c
a
Input metering point selection menu
Select the metering point of the input level from the menu.
(
PRE HPF :
Just before the head amp (just before HPF)
(
PRE FADER :
Just before the fader
(
POST ON :
Right after the [ON] key
b
Output metering point selection menu
Select the metering point of the output level from the menu.
(
PRE EQ :
Just before EQ
(
PRE FADER :
Just before the fader
(
POST ON :
Right after the [ON] key
59
Screen functions and names > METER screen