User Manual
Table Of Contents
- Table of contents
- Introduction
- Controls and functions
- Overview of screens
- HOME screen
- DAW REMOTE screen
- Channel-specific screens
- Other fixed display areas
- MAINTENANCE screen
- Operating Screens
- SCENE screen
- RECORDER screen
- MONITOR screen
- SETUP screen
- LOGIN screen
- HOME screen
- DAW REMOTE screen
- Channel-specific screens
- Adjusting EQ in manual mode
- Adjusting EQ in 1-knob mode
- Configuring the HPF
- Configuring GATE/DUCKING
- Adjusting the compressor in manual mode
- Adjusting the compressor in 1-knob mode
- Setting effects
- Adjusting the send to MIX/MATRIX BUS level
- Setting the send to FX BUS level
- Adjusting the send to FX/MIX/MATRIX BUS level with faders
- Using GEQ
- Using faders to adjust GEQ
- Configuring mute safe
- Setting the send levels from output channels (MIX, STEREO) to MATRIX
- Recall presets
- Editing presets
- MAINTENANCE screen
- DM3 Editor
- Using the Editor
- Appendix
RECORDER (INPUT/OUTPUT) screen
The RECORDER (INPUT/OUTPUT) screen is for operating RECORDER inputs and outputs.
hg i
a
b c fd e
a
Record source selection buttons
The channel name(s) to be recorded are displayed. The indicator lights if the recording source level is too high.
Touch the jump button to open the RECORDER PATCH screen.
b
RECORD level meter
Displays the recording volume level.
c
RECORD level slider
Sets the recording volume level.
d
Playback level meter
Displays the play volume level.
e
Play volume level slider
Sets the play volume level.
f
Playback channel selection button
Selects the channel to play the audio data of the USB storage device.
Touch the jump button to open the PLAYBACK PATCH screen.
67
Screen functions and names > RECORDER Screen