User Manual
Table Of Contents
- Table of contents
- Introduction
- Controls and functions
- Overview of screens
- HOME screen
- DAW REMOTE screen
- Channel-specific screens
- Other fixed display areas
- MAINTENANCE screen
- Operating Screens
- SCENE screen
- RECORDER screen
- MONITOR screen
- SETUP screen
- LOGIN screen
- HOME screen
- DAW REMOTE screen
- Channel-specific screens
- Adjusting EQ in manual mode
- Adjusting EQ in 1-knob mode
- Configuring the HPF
- Configuring GATE/DUCKING
- Adjusting the compressor in manual mode
- Adjusting the compressor in 1-knob mode
- Setting effects
- Adjusting the send to MIX/MATRIX BUS level
- Setting the send to FX BUS level
- Adjusting the send to FX/MIX/MATRIX BUS level with faders
- Using GEQ
- Using faders to adjust GEQ
- Configuring mute safe
- Setting the send levels from output channels (MIX, STEREO) to MATRIX
- Recall presets
- Editing presets
- MAINTENANCE screen
- DM3 Editor
- Using the Editor
- Appendix
c
Oscillator output button
Turns the oscillator output ON and OFF. When ON, the oscillator signal is sent to the bus or input channel selected
with the assign buttons.
d
Oscillator assign buttons
Determine which channels the oscillator output signal is sent to. Touch buttons to specify the individual channel(s)
(multiple may be selected).
e
Oscillator output level meter
Displays the oscillator output level.
f
Oscillator output level slider
Adjusts the oscillator output level.
n
MONITOR (OSCILLATOR) screen menu
Swipe left on the menu swipe indicator on the right of the MONITOR (OSCILLATOR) screen to open the
following menu.
a
a
Clear All
Clears all assignments.
Related links
“Configuring the oscillator”(p.252)
75
Screen functions and names > MONITOR screen