User Manual
Table Of Contents
- Table of contents
- Introduction
- Controls and functions
- Overview of screens
- HOME screen
- DAW REMOTE screen
- Channel-specific screens
- Other fixed display areas
- MAINTENANCE screen
- Operating Screens
- SCENE screen
- RECORDER screen
- MONITOR screen
- SETUP screen
- LOGIN screen
- HOME screen
- DAW REMOTE screen
- Channel-specific screens
- Adjusting EQ in manual mode
- Adjusting EQ in 1-knob mode
- Configuring the HPF
- Configuring GATE/DUCKING
- Adjusting the compressor in manual mode
- Adjusting the compressor in 1-knob mode
- Setting effects
- Adjusting the send to MIX/MATRIX BUS level
- Setting the send to FX BUS level
- Adjusting the send to FX/MIX/MATRIX BUS level with faders
- Using GEQ
- Using faders to adjust GEQ
- Configuring mute safe
- Setting the send levels from output channels (MIX, STEREO) to MATRIX
- Recall presets
- Editing presets
- MAINTENANCE screen
- DM3 Editor
- Using the Editor
- Appendix
CUSTOM FADER BANK screen
CUSTOM FADER BANK allows you to assign channels freely. Two CUSTOM FADER BANK can be used. It also
sets the [MAIN] fader assignments for normal FADER BANK and DAW REMOTE BANK.
a b
c
a
CUSTOM FADER BANK selection buttons
For selecting the CUSTOM FADER BANK or MAIN to configure.
CUSTOM 1 and CUSTOM 2 provide complete freedom in assigning channels to faders.
MIXER MAIN sets the [MAIN] fader assignments for the normal FADER BANK.
REMOTE MAIN sets the [MAIN] fader assignments for DAW REMOTE MAIN.
b
Channel buttons
For selecting the channels to assign to the fader selected in c.
When MAIN is assigned to the [MAIN] fader, it becomes the send main when on SENDS ON FADER.
If you select None, nothing is assigned to the corresponding fader.
c
Fader buttons
For selecting the fader to assign channels to.
n
CUSTOM FADER BANK screen menu
Swipe left on the menu swipe indicator on the right of the CUSTOM FADER BANK screen to open the following
menu.
91
Screen functions and names > SETUP screen