User Manual
Table Of Contents
- Table of contents
- Introduction
- Controls and functions
- Overview of screens
- HOME screen
- DAW REMOTE screen
- Channel-specific screens
- Other fixed display areas
- MAINTENANCE screen
- Operating Screens
- SCENE screen
- RECORDER screen
- MONITOR screen
- SETUP screen
- LOGIN screen
- HOME screen
- DAW REMOTE screen
- Channel-specific screens
- Adjusting EQ in manual mode
- Adjusting EQ in 1-knob mode
- Configuring the HPF
- Configuring GATE/DUCKING
- Adjusting the compressor in manual mode
- Adjusting the compressor in 1-knob mode
- Setting effects
- Adjusting the send to MIX/MATRIX BUS level
- Setting the send to FX BUS level
- Adjusting the send to FX/MIX/MATRIX BUS level with faders
- Using GEQ
- Using faders to adjust GEQ
- Configuring mute safe
- Setting the send levels from output channels (MIX, STEREO) to MATRIX
- Recall presets
- Editing presets
- MAINTENANCE screen
- DM3 Editor
- Using the Editor
- Appendix
d
Mode selection buttons
(
Single :
Mode for communicating via the MIDI channel set up on the Setup screen.
When Omni is selected under Single, all MIDI channel program changes are communicated.
Communication is only via the MIDI channel set up on the Setup screen.
When Bank is selected under Single, Bank Select for control changes is communicated.
(
Multi :
Mode for communicating via all MIDI channels.
n
Scene selection screen
The Scene selection screen is for assigning scene memories to program changes.
b
a
a
Program change display
Displays the MIDI channel numbers and program change numbers assigned to scenes.
Displays the bank and program change numbers when Single and Bank are selected.
b
Scene list
For selecting the scene assigned to program change.
If no scene is assigned, select No Assign via Function.
96
Screen functions and names > SETUP screen