User Manual
Table Of Contents
- Table of contents
- Introduction
- Controls and functions
- Overview of screens
- HOME screen
- DAW REMOTE screen
- Channel-specific screens
- Other fixed display areas
- MAINTENANCE screen
- Operating Screens
- SCENE screen
- RECORDER screen
- MONITOR screen
- SETUP screen
- LOGIN screen
- HOME screen
- DAW REMOTE screen
- Channel-specific screens
- Adjusting EQ in manual mode
- Adjusting EQ in 1-knob mode
- Configuring the HPF
- Configuring GATE/DUCKING
- Adjusting the compressor in manual mode
- Adjusting the compressor in 1-knob mode
- Setting effects
- Adjusting the send to MIX/MATRIX BUS level
- Setting the send to FX BUS level
- Adjusting the send to FX/MIX/MATRIX BUS level with faders
- Using GEQ
- Using faders to adjust GEQ
- Configuring mute safe
- Setting the send levels from output channels (MIX, STEREO) to MATRIX
- Recall presets
- Editing presets
- MAINTENANCE screen
- DM3 Editor
- Using the Editor
- Appendix
MIDI (Control Change) screen
The MIDI Control Change screen is the screen for assigning faders and/or [ON] keys to control changes.
a
b
a
Control change list
(
No. :
Displays the control change number.
(
Control Change Event :
Displays the parameter(s) assigned to control change numbers.
Touch to display the MIDI CONTROL CHANGE selection screen.
b
Control change selection button
Turns the control change communication signal ON/OFF.
Functions the same as the Control Change selection buttons on the Setup screen.
n
MIDI CONTROL CHANGE selection screen
The MIDI CONTROL CHANGE screen is for assigning parameters to control changes.
98
Screen functions and names > SETUP screen