User Manual

500
83425 25
220
884
25 25
500
430
220
480
unit : mm
*1 Total harmonic distortion is measured with a 18dB/Oct filter @80kHz.
*2 Hum & noise level is measured with a 6dB/oct filter @12.7kHz; equivalent to 20kHz filter with
infinite dB/Oct attenuation.
*3 Crosstalk is measured with a 30 dB/octave filter @22kHz.
LS9
LS9-32
LS9-16
GENERAL SPECIFICATIONS
Internal processing 32bit (Accumulator=58bit)
Number of scene memories 300
Sampling frequency rate Internal : 44.1kHz, 48kHz
External: 44.1kHz (-10%) to 48kHz (+6%)
Signal Delay Less than 2.5 ms CH INPUT to OMNI OUT (@fs=48kHz)
Total harmonic distortion*
1
CH INPUT to OMNI OUT
Input Gain=Min.
Less than 0.05% 20Hz to 20kHz @+4dBu into 600Ω
Frequency response
CH INPUT to OMNI OUT
+0.5, -1.5dB 20Hz to 20kHz @+4dBu into 600Ω
Dynamic range
(maximum level to noise level)
110dB typ, DA Converter (OMNI OUT)
108dB typ, AD+DA (to OMNI OUT)
Hum & noise level*
2
-128dBu Equivalent Input Noise
(20Hz to 20kHz, Rs=150Ω, Input Gain=Max)
-84dBu residual output noise
Crosstalk (@1kHz)
Input Gain=Min.
-100dB*
3
, -80dB, Adjacent Input Channels
-100dB*
3
, -80dB, Input to Output
Phantom Power +48V
Power requirements AC110V-240V, 50/60Hz
Power consumption LS9-32: 170W, LS9-16: 95W
Dimensions (W x H x D) LS9-32: 884 x 220 x 500mm (34.8" x 8.6" x 19.6")
LS9-16: 480 x 220 x 500mm (18.9" x 8.6" x19.6")
Weight LS9-32: 19.4kg (42lbs)
LS9-16: 12.0kg (26lbs)
ANALOG INPUT SPECIFICATIONS
ANALOG OUTPUT SPECIFICATIONS
Input terminal GAIN
Actual
source
impedance
For use with
nominal
Input level
Connector
Sensitivity Nominal
Max.
before clip
INPUT 1-n *
1
-62dB
3kΩ
50-600Ω Mics
& 600Ω Lines
-82dBu -62dBu -42dBu
XLR3-31 type*
+10dB -10dBu +10dBu +30dBu
Output terminal
Actual source
impedance
For use with
nominal
GAIN SW
Output terminals
Connector
Nominal
Max.
before clip
OMNI OUT 1-n *
1
75Ω 600Ω Lines
+24dB +4dBu +24dBu
XLR3-32 type*
+18dB -2dBu +18dBu
PHONES 15Ω
8Ω Phones — 75mW 150mW
ST Phone Jack**
40Ω Phones — 65mW 150mW
DIGITAL INPUT SPECIFICATIONS
DIGITAL OUTPUT SPECIFICATIONS
Terminal Format Data length Level Connector
2TR IN DIGITAL IEC60958 24bit 0.5Vpp/75Ω RCA Pin jack
Terminal Format Data length Level Connector
2TR OUT DIGITAL
IEC60958
(Consumer Use)
24bit 0.5Vpp/75Ω RCA Pin jack
CONTROL I/O SPECIFICATIONS
Terminal Format Level Connector
NETWORK (Ethernet) 100Base-T 100Base-T RJ-45
MIDI
IN MIDI — DIN Connector 5P
OUT MIDI — DIN Connector 5P
WORD CLOCK
IN — TTL/75Ω terminated BNC Connector
OUT — TTL/75Ω BNC Connector
USB HOST USB1.1 — A type USB Connector (female)
LAMP (LS9-32 only) — 0-12V XLR4-31 Type
DIMENSIONS
*1. LS9-32: n=32, LS9-16: n=16
*1. LS9-32: n=16, LS9-16: n=8