User Manual

M7CL Editor Installation Guide 7
Network settings of the M7CL
• When connecting the computer to the M7CL directly.
You can use the following initial settings.
• When you connect the computer to the M7CL via LAN.
Set the appropriate address in accordance with LAN.
Your computer and the M7CL should exist in the same subnet in the same network address.
Network settings of computer
If you are connecting the M7CL to your computer in a one-to-one connection, we recommend that you make the
following settings.
However, it must not conflict with the IP address of any other device on the network.
n The M7CL cannot be directly connected if the IP address is assigned automatically.
Please contact your network administrator for further detail.
IP address 192.168.0.128
Gateway address 192.168.0.1
Subnet mask 255.255.255.0
IP address Sets the IP address so that it does not conflict with the IP address of any other device on
the network.
Gateway address If you set the IP address, the first three numbers are automatically set. Set the last
number of the IP address of the gateway when the gateway exists. Set the vacant
address when the gateway does not exist.You should set the address in the same
subnet as IP address.The address should be set in the same subnet as IP address
within LAN in which the subnet is set.
Subnet mask Use an initial setting of [255.255.255.0] in LAN environment in which the subnet is not
set. In LAN in which the subnet is set, set the address in accordance with the
environment.
IP address 192.168.0.3
Subnet mask 255.255.255.0
Default gateway 192.168.0.1