User Manual

12
Mix to Stereo, Mix to Matrix & Stereo to Matrix: Pan/Balance
PM5D
Un-paired Channel
Paired Channel *
Odd Ch value
Even Ch value
Odd Ch value
Even Ch value
M7CL
Pan: Copy Pan: Copy
Pan: L63
Pan: R63
Balance: Center
PM5D
Pan: Copy
Pan: Copy
Pan: L63
Pan: R63
M7CL
Odd Ch value
Even Ch
value
Pan: L63
Pan: R63
Balance for odd & even Ch
Un-paired Channel
Paired Channel
* Mix to Stereo, Mix to Matrix and Stereo to Matrix on PM5D’s paired channels doesn’t have Balance.
5) Insert point and Direct Out point are reproduced, though the value will be substituted when
the destination console doesn’t have the same point.
Insert Point -Input Channel
PM5D
Pre EQ
Post EQ
Pre Delay
Post Fader
M7CL
Pre EQ
Pre Fader
Post On
Insert Point -Output Channel
PM5D
Pre EQ
Post EQ
Pre Fader
Post On
M7CL
Pre EQ
Pre Fader
Post On
Direct Out Point -Input Channel
PM5D
Pre Att
Pre HPF
Pre EQ
Pre Fader
Post On
M7CL
Pre HPF
Pre EQ
Pre Fader
Post On
6) Only the 4 LOWER band parameters of PM5D’s Output EQ are reproduced.
7) Mute Master setting in the Current Scene is copied to all Scene Memories of the converted
file.
If manual control of the Mute Master on PM5D is required, please set Recall Safe for
“Mute Master”. This is because only PM5D is able to change Mute Master status with
Scene Recall.
8) A limited number of Effects are reproduced due to the difference of available Effect unit
numbers.
In the case of conversion from PM5D to M7CL, PM5D’s Effects 1-4 are converted to
M7CL’s rack 5-8 Effects.
In the case of conversion from M7CL to PM5D, M7CL’s Rack 5-8 Effects are
converted to PM5D’s Effects 1-4 (when M7CL racks are set to Effect, not GEQ).
Effect module
PM5D
Effect 1-4
Effect 5-8
n/a
M7CL
Effect(Rack5-8)
n/a
GEQ (Rack5-8)
9) HA, Channel name and Library link / Recall Safe, Focus & Selective Recall
Refer to sections “3.2.3 Library Link” and “3.4 Recall Filter Treatment”.