User Manual

M7CL V3 Editor Owner’s Manual
79
SENDS ON FADER mode enables you to adjust the send level to the MIX/MATRIX bus using the fader. In this mode,
the signals sent from all input channels to a specific MIX/MATRIX bus can be adjusted simultaneously.
Use the SENDS ON FADER button in the Master window to switch this mode on and off.
To display this window, do one of the following:
• Select [Sends on Fader] in the [Windows] menu.
•Click the SENDS ON FADER button in the Master window.
In SENDS ON FADER mode, the color and function of the [ON] button and the fader in the Overview window will
change.
Click the button (in the Sends On Fader window) for the MIX/MATRIX bus for which you want to adjust the send
level. Then switch the send level off or on, and adjust the send level using the [ON] button and fader for the input
channel displayed in the Overview window.
For MATRIX bus send, not only the input channels but MIX channels and STEREO/MONO channels can
be in SEND ON FADER mode.
[ON] button
Color of the send destination Send is on.
Gray Send is off.
Fader
Color of the send destination The signal is sent to the bus.
Gray The signal is NOT sent to the bus.
Sends On Fader window
NOTE