User Manual

Step 8 Saving your Configuration
54
Quick Setup Function of SB168-ES and MY16-ES64 System
When using SB168-ES in certain configurations, the Quick Setup function may be used
to automatically setup audio patches and head amp control. Quick Setup may be used
with systems having one MY16-ES64 card and from 1 to 4 SB168-ES units. However
after setting the patches by using “Quick Setup”, it is strongly recommended that all the
patches are not changed. (For details, refer to the SB168-ES user’s manual.) If other
EtherSound devices exist on the system, configuration must be done manually. The
manual configuration procedure for SB168-ES units is identical to that of other
EtherSound devices. When configuring SB168-ES manually, the parameters displayed
in the Quick Setup box may be ignored since they do not reflect current parameter
values. (The Quick Setup box only indicates what is going to be set when the APPLY
button is pressed.)
AVS-Monitor / Quick Setup Box in the SB168-ES Control Page