User Manual

Quick Start Guide

MG12XUK Owner’s Manual

STEP 2 Getting sound to the speakers

1. Make sure that the [ / ] switch at the rear

panel is set to the [ ] position (power off).

2. Connect the supplied AC adaptor.

q Connect the power adaptor with the gap of the

plug facing up, aligning it to the [AC ADAPTOR

IN] connector.

w Turn the fastening ring clockwise to secure the

connection.

e Plug the power adaptor into a standard house-

hold power outlet.

3. Make sure that all switches on the unit are not

engaged (pressed in).

4. Turn all the level control knobs fully to the left (min-

imum). These include the [GAIN] knobs (white),

[LEVEL] knobs (white), and [STEREO LEVEL] knob

(red).

5. Set the equalizer knobs (green) to the center “”

position.

6. If you connect a device with high output level, such

as a CD player or an electric keyboard, to one of the

channels 1 to 6, turn on ( ) the [PAD] switch of

the corresponding channel*.

NOTE

If you are using condenser microphones, turn on ( ) the

[PHANTOM +48V] switch.

7. Make sure that the volume of a powered speaker or

amplifier is set to the minimum.

[/] switch

[AC ADAPTOR IN] connector

AC ADAPTOR IN

[GAIN]

Equalizer

[LEVEL]

[STEREO

LEVEL]

Channel

[PAD] switch