User Manual
MG12XUK Owner’s Manual
5
Handling caution
• Do not rest your weight on the device or place heavy
objects on it. Avoid applying excessive force to the buttons,
switches or connectors to prevent injuries.
• Avoid pulling the connected cables to prevent injuries or
damage to the device.
NOTICE
To avoid the possibility of malfunction/damage to the product, damage to data, or damage to other property, follow the notices
below.
Handling and maintenance
• Do not use the device in the vicinity of a TV, radio, AV equipment, mobile phone, or other electric devices. Otherwise, the
device, TV, or radio may generate noise.
• Do not expose the device to excessive dust or vibration, or extreme cold or heat (such as in direct sunlight, near a heater, or
in a car during the day), in order to prevent the possibility of panel disfiguration, unstable operation, or damage to the inter-
nal components.
• Do not place vinyl, plastic or rubber objects on the device, since this might discolor the panel.
• When cleaning the device, use a dry and soft cloth. Do not use paint thinners, solvents, cleaning fluids, or chemical-impreg-
nated wiping cloths.
• Condensation can occur in the device due to rapid, drastic changes in ambient temperature—when the device is moved
from one location to another, or air conditioning is turned on or off, for example. Using the device while condensation is
present can cause damage. If there is reason to believe that condensation might have occurred, leave the device for several
hours without turning on the power until the condensation has completely dried out.
• To avoid generating unwanted noise, make sure there is adequate distance (50cm or more) between the AC adaptor and
the device.
• Do not apply oil, grease, or contact cleaner to the knobs. Doing so may cause problems with electrical contact or knob
motion.
• Always turn the power off when the device is not in use.
• Even when the power switch is in standby status, electricity is still flowing to the device at the minimum level. When you are
not using the device for a long time, make sure you unplug the power cord from the wall AC outlet.
Connectors
XLR-type connectors are wired as follows (IEC60268 standard): pin 1: ground, pin 2: hot (+), and pin 3: cold (-).
Information
About copyrights
• Copying of the software or reproduction of this manual in whole or in part by any means is expressly forbidden without the
written consent of the manufacturer.
• This product incorporates and bundles computer programs and contents in which Steinberg Media Technologies GmbH and
Yamaha Corporation own copyrights or with respect to which it has license to use others' copyrights. Such copyrighted
materials include, without limitation, all computer software, style files, MIDI files, WAVE data, musical scores and sound
recordings. Any unauthorized use of such programs and contents outside of personal use is not permitted under relevant
laws. Any violation of copyright has legal consequences. DON'T MAKE, DISTRIBUTE OR USE ILLEGAL COPIES.
About this manual
• The illustrations as shown in this manual are for instructional purposes only.
• Steinberg Media Technologies GmbH and Yamaha Corporation make no representations or warranties with regard to the use
of the software and documentation and cannot be held responsible for the results of the use of this manual and the software.
• iPhone and iPad are trademarks of Apple Inc., registered in the U.S. and other countries.
• IOS is a trademark or registered trademark of Cisco in the U.S. and other countries and is used under license.
• Steinberg and Cubase are registered trademarks of Steinberg Media Technologies GmbH.
• The company names and product names in this manual are the trademarks or registered trademarks of their respective
companies.
• Software may be revised and updated without prior notice.
About disposal
This product contains recyclable components. When disposing of this product, please contact the appropriate local authori-
ties.
European models
Purchaser/User Information specified in EN55103-2:2009.
Conforms to Environments: E1, E2, E3 and E4
Yamaha cannot be held responsible for damage caused
by improper use or modifications to the device,
PA_en_8 1/2