User Manual

Resources
Yamaha LAN Monitor User Guide



The following messages appear if there is a change in a Dante-enabled device.
 
The following messages appear when the snapshot function detects a network error, or when snapshot creation
is started. mac indicates the MAC address of the device that is the subject of the message, label indicates the
label identifying the device (does not appear when left blank), n indicates the port number. Messages are not
shown for devices that are not the subject of monitoring by the snapshot function.
 
The following messages appear when the PoE function detects abnormality in a power supply. mac indicates
the MAC address of the device that is the subject of the message, label indicates the label identifying the
device (does not appear when left blank), q indicates a number that represents the power, n indicates the port
number, portIp indicates the IP address of the device connected to the port, and portMac indicates the MAC
address of the device connected to the port. Messages are not shown for devices that do not support power
supply.
[mac] label: The transmission load has reached the upper limit at port (n) of the Yamaha switch. (QoS transmission
queue: x)
[mac] label: The transmission load of the Yamaha switch (n) has returned to normal. (QoS transmission queue: x)

The word clock of <device name> has been unlocked.
The word clock of <device name> has been locked.
The link is down for the primary port of <device name>. Dante is only working for the secondary port.
The link is down for the secondary port of <device name>. Dante is only working for the primary port.
The link is up for the primary port of <device name>.
The link is up for the secondary port of <device name>.
The Dante module of <device name> is operating in safe mode.

[mac] label: Device status matches the snapshot.
[mac] label: An unregistered device [mac] label is connected.
[mac] label: [mac] label is not connected to port n.
[mac] label: There is a device with an incorrect connection port. Connect [mac] label to port n.
Create a snapshot.
Started creating a snapshot.
Finished creating a snapshot.
Snapshot creation canceled.
Failed to create a snapshot.
[mac] label: There is a port with an incorrect device connected. Connect [mac] label to port n.

[mac] label: The power being supplied from Yamaha switch has exceeded the guard-band (q W).
