User Manual

Example 2) Remote conferencing system that also uses Speech Privacy
MRX Setup Manual
79
10.
Double-click the area where the Input 1 port name is displayed.
The “Port Label” dialog box will appear.
11.
Input [Aux L] and click the [OK] button.
12.
Repeat steps 10 and 11 to input the names for the other ports.
In this example, we’ve used the following names.
13.
Click the spaces to turn the sends on, as shown in the image below.
14.
Click the [×] button at the top right-hand corner to close the component editor.
Input
1Aux L
2Aux R
3 Codec In
4 Local Mics
Output
1 Codec Out
2SP L
3SP R
4AEC