User Manual

“Scheduler” dialog box Chapter 7. Dialog boxes/Software applications
MTX-MRX Editor User Guide
192
If you chose Paging
For each MTX/MRX unit, specify the ZONE/ZONE GROUP to which message files
saved on the SD memory card will be broadcast when the event occurs.
Click the button of the MTX/MRX unit that you want to set; the “SD Message Select”
dialog box will appear.
To use the Paging function, use the “ZONE” screen to specify the Paging and Zone
Group, and use the “PGM1/PGX1” dialog box to specify chime and other settings.
● EVENT SCHEDULE
Specify the date and time at which the event will occur.
• [Color] select switches
Choose the color of the event shown in the calendar. By specifying a color, you can
make it easier to distinguish certain types of event.
•[Date]
Specifies the date on which the event will occur. (year/month/day)
You can change the date either by inputting it directly or by clicking the calendar that
appears when you click the calendar icon at the right.
Depending on the REPEAT EVENT setting described below, this might not be
shown.
•[Time]
Specifies the time at which the event will occur. (hour:minute:second, in 24-hour
time)
Click the hour/minute/second that you want to specify, and use the spin box or enter
a value directly.
If you select REPEAT EVENT and specify the event frequency as “Hourly,” you’ll
only be able to set the minutes and seconds.