User Manual
Tool buttons Chapter 2. Menu bar and tool buttons
MTX-MRX Editor User Guide
32
Tool buttons
Related
tools
Buttons etc. Summary Dialog box that appears
File
[New]
Creates a new project file.
If you are currently editing a project file, a
confirmation message will appear.
This button is not available while online.
“Device Configuration
Wizard” dialog box
[Open]
Opens a saved project file.
If you are currently editing a project file, a
confirmation message will appear.
This button is not available while online.
“Open File” dialog box
[Go Online – From
Devices]
Loads the settings of the currently operating
MTX/MRX system into MTX-MRX Editor.
You can use this command if you have lost the
setup file of the MTX/MRX system.
If you are currently editing a project file, a
confirmation message will appear.
This button is not available while online.
“Go online – From
devices” dialog box
[Save]
Saves the project file (overwriting the previous
version of the file).
The first time you save, the “Save File” dialog
box will appear; specify a name for the file and
save it.
–
Preset
[EDIT] indicator
This indicator will light if you edit a parameter or
setting. In this case, store the preset as
necessary.
–
Preset select box
The stored presets will be displayed as shown
below. (Empty presets are not shown.) The
preset you select here will be recalled.
You can overwrite-store by clicking the name of
a stored preset.
When you click the ▼ at right, a pulldown menu
appears, allowing you to recall the selected
preset.
–
[Preset]
Allows you to make preset-related settings. “Preset” dialog box
[Preset Link]
Allows you to specify the preset number that will
be linked when preset recall is linked between
MTX/MRX systems.
“Preset Link” dialog box
File-related tools Preset-related tools Synchronization-related tools
Preset name
Preset number
Shown only if recall
filter is specified
A chain icon is shown if preset recall is linked.
A lock icon is shown if the preset is locked.