User Manual

Output channels Chapter 4. System screen

MTX-MRX Editor User Guide

Output channels

1 Channel index

Indicates the number of the MTX’s output channel.

2 Port select button

Opens the “Output Patch” dialog box. The button shows the currently

selected port. If more than one port is assigned, a [+] is shown at the end of

the port name.

3 Port/external device parameter access button

This button displays a Parameter editing screen where you can edit the

parameters of the MTX’s output connector and the parameters of the

external device that is associated with that channel.

4 “DELAY/ROOM EQ” screen access button

Switches to the “DELAY/ROOM EQ” screen. The button also shows the on/

off status.

5 SP 1way/SP 2way indication

Indicates the signal type of the output channel. Output channel settings are

made in [OUTPUT CHANNEL SETUP] of the “MTX Configuration”

dialog box.

6 “SPEAKER PROCESSOR” screen access button

Switches to the “SPEAKER PROCESSOR” screen. The button also shows

the on/off status.

For details on adjusting the following parameters, refer to Input channels.

• [SEL] button

•[ON] button

• Fader/meter

•Output channel volume

•Channel name