User Manual

“PAGING” screen (MTX5-D only) Chapter 4. System screen
MTX-MRX Editor User Guide
92
“PAGING” screen (MTX5-D only)
In this screen you can make settings for the PGM1 paging station microphone.
Paging refers to the function of broadcasting an announcement.
For the workflow of making settings, refer to “Workf low for paging settings” in the
appendix, or the “MTX Setup Manual.”
The SD messages referred to here are standard-format announcements saved on the SD
card of the MTX.
1 PAGING [ON] button
Turns the paging function on/off.
2 [Settings] button
When you click this, the “PGM1/PGX1” dialog boxwill appear.
3 PAGING SOURCE settings area
•Indicator
This is lit if there is a currently-broadcasting PGM1 or SD.
• Channel list box
Selects the paging source. Select the input channel to which a PGM1 or SD is
connected. Specify 1st Mic for the input channel of the PGM1 that is specified as 1st
Priority.
4 ZONE area
•Indicator
This is lit if there is a zone that is currently broadcasting using a PGM1 or SD
message.
1 2
3 645