User Manual
Table Of Contents
- Contents
- What you can do using ProVisionaire Touch
- Operating requirements of the software
- Terms and concepts to understand
- Installation procedure
- Startup
- Basic process
- Operations for common settings
- About the menu bar
- Settings file management — the File Management button
- Selecting multiple widgets — Multi Select button
- Creating a custom panel — the Page Edit button
- Widget design
- Assigning parameters
- Switching pages — the Page Selection button (Control mode)
- Managing pages — the Page Management button (Design mode)
- Registering devices to control — the Device Management button
- Control panel settings — the Setup button
- Control panel information — the Information button
- Preparations before you make connections
- Troubleshooting
- About the software license
11
Now let’s specify a device and a parameter that will be controlled by
this button.
1. In the [Devices] screen that appears when you tap the
Device Management button in the menu bar,
specify the device that will be controlled. Register-
ing a device
For this example, set [Model] to “MTX3,” and [Unit ID] to “01.”
Assign a [Name] as you please. If there is a specific device that you
want to specify, read “Registering a device” and also specify the
appropriate monitor device.
2. Tap the button to access the following context menu.
3. Tap [Parameter].
The [Button Parameter Assign] screen appears.
4. To assign one parameter to the button, tap the func-
tion name of the button at the right edge of the [Mode]
field, and choose [Single Latch] from the menu that
appears.
The function name for an on/off switch will be [Single Latch].
5. In the [Devices] list, tap “the device that you specified
in step 1.”
A list of the assignable parameters appears.
Select the parameter that you want this button to turn on/off. For
example if you want the button to turn the channel 1 input on/off,
make the setting shown in the screen below.
* The setting screen differs depending on the selected button Mode.
* For details, refer to “Assigning parameters.”
6. Tap [Done] to complete the assignment.
* The icon which indicates that parameter assignment is incomplete
disappears when the parameter has been assigned.
2. Specify devices and parameters