User Manual
Table Of Contents
- Contents
- An overview of MRX Designer
- Screen structure
- Basic use of MRX Designer
- Menu bar
- Tool buttons
- Shortcut keys
- Design sheet
- “Parameter Sets” area
- “Parameter Link Group” area
- “Gang Edit Group” area
- “Properties” area
- Components and the component editor
- Editing the parameters
- Acoustic Echo Canceller (AEC)
- Ambient Noise Compensator (ANC)
- Audio Detector
- Auto Gain Controller (AGC)
- Combiner
- Delay
- Dynamics
- Effect
- EQ
- Fader
- Feedback Suppressor
- Filter
- Inputs/Outputs
- Meter
- Mixer
- Oscillator
- Paging
- Polarity
- Revolabs Control
- Router
- Source Selector
- Speaker Processor
- Speech Privacy
- Text
- Transmitter/Receiver
- User Defined Block
- Dialog boxes and applications
- “Print” dialog box
- “Install Speech Privacy File” dialog box
- “File Transfer” application
- “PGM1 Label Creator” application
- “Compile” dialog box
- “Snapshot Group” dialog box
- “Remote Control Setup List” dialog box
- “External Events” dialog box
- “GPI” dialog box
- “Digital Control Panel” dialog box / “Wireless DCP” dialog box / “MCP1” dialog box
- “PGM1/PGX1” dialog box
- “Port Name” dialog box
- List of settings in “Settings” dialog boxes
- Context menus
- Troubleshooting
“Delay Matrix” parameter setting window / “Matrix Mixer” parameter setting window
MRX Designer User Guide
97
3 [ON] button
Switches the send on/off.
4 Delay Time knob (“Delay Matrix” parameter setting window only)
Specifies the delay time. The units are msec. You can select the units in the Type list box.
5 Fader
Adjusts the send level from the input channel.
6 Input port name
Shows or edits the input port name.
This is linked with the “Label” of the component’s ports.
7 [OUTPUT CHANNEL] list box
Switches the output channel for which to make settings.
8 Output port name
Shows or edits the output port name.
This is linked with the “Label” of the component’s ports.
9 Type list box
The delay time specified by the Delay Time knob is converted into the units you select,
and shown at the left.
• ms ............... Milliseconds
• Sample....... Number of samples (The range will depend on the sampling frequency
setting.)
• Meter.......... Meters/second
• Feet............. Feet/second
0 [ON] button
Turns all on.
A [OFF] button
Turns all off.
B [NOMINAL] button
Sets the send level from the input channel to 0 dB.
C [-3dB] button
Sets the send level from the input channel to –3 dB.
D [-6dB] button
Sets the send level from the input channel to –6 dB.
E [MINIMUM] button
Sets the send level from the input channel to –∞ dB.