User Manual
88
“Import Controller File” dialog box
This dialog box is for importing a controller file.
• Leave blank if not entering a code.
If the file you are importing requires a passcode, input the pass-
code.
If the file doesn’t need a passcode, click OK.
“Select Controllers to Import” dialog
box
This screen is for selecting the controller you want to import from
the project file.
• Controllers
Shows the list of controllers in the project file. Select the con-
troller you want to import. When you select a controller, the
devices used by that controller are shown in “Device ID Remap-
ping” on the right side.
• Match Device By
Changes the UNIT ID and Manual IP (manually assign IP
addresses) of the devices used in the controller.