User Manual

Head Amp Control
Owner’s Manual
26
Dante Network Settings and
Audio Routing
Rio-D2 does not have the function for changing Dante
network settings, such as Sample Rate, Latency or
Encoding. The Dante network settings will be controlled
from Dante Controller or the supported digital mixers.
For details on the Dante network settings, refer to the
corresponding owner’s manual of the supported digital
mixers.
The audio inputs and outputs of multiple Dante devices can
be freely routed within a Dante network. This means that
you need to make settings that specify the destination to
which each channel’s signal will be sent.
Use Dante Controller to specify the Dante network and
audio routing settings.
Dante Controller can be downloaded from the following
website.
http://www.yamahaproaudio.com/
For details on Dante Controller, refer to the Dante
Controller owner’s manual on the same website.
Head Amp Control
The Rio-D2 head amplifiers can be remotely controlled
from a host device, such as a compatible Yamaha digital
mixing console.
Control from a Supported
Device
The Rio-D2 head amplifiers can be controlled remotely
from a supported device such as a RIVAGE PM, CL, QL, or
TF series device.
The supported device connected to Rio-D2 displays the
model name and UNIT ID number of the corresponding
Rio-D2 unit to be controlled.
If you plan to connect to a supported device to monitor and
control the head amplifiers, refer to the owner’s manual for
the corresponding device.
Head Amplifier Parameters
That Can be Monitored and
Controlled
Parameter Description
+48V
Turns +48V phantom power ON or
OFF for each channel.
HA GAIN
Adjusts gain from –6 dB to 66 dB in
1-dB increments.
HPF
Turns the high-pass filter ON or
OFF.
HPF FREQ
Adjusts the cutoff frequency of the
high-pass filter (12 dB/Oct.) from
20 Hz to 600 Hz in 60 steps.
METER
Displays a level meter for each
input channel.
+48V Master SW
Displays the [+48V MASTER]
switch ON/OFF status of the +48V
phantom power supply.
Gain Compensation
Turns the Gain Compensation ON
or OFF.