User Manual
Table Of Contents
- How to Use This Reference Manual
- Contents
- Function Tree
- SELECTED CHANNEL section
- Centralogic section
- Input and output patching
- Input channels
- Signal flow for input channels
- Specifying the channel name, icon and channel color
- Making HA (Head Amp) settings
- Sending a signal from an input channel to the STEREO/MONO buses
- Sending a signal from an input channel to a MIX/ MATRIX bus
- Correcting delay between channels (Input Delay)
- Channel library operations
- Output channels
- EQ and Dynamics
- Grouping and linking
- Scene memory
- About scene memories
- Using scene memories
- Editing scene memories
- Using the Global Paste function
- Using the Focus function
- Using the Recall Safe function
- Using the Fade function
- Outputting a control signal to an external device in tandem with scene recall (GPI OUT)
- Playing back an audio file that links to a scene recall
- Using Preview mode
- Monitor and Cue functions
- Talkback and Oscillator
- Meters
- Graphic EQ, effects, and Premium Rack
- I/O device and external head amp
- MIDI
- User settings (Security)
- Recorder
- Help function
- Other functions
- About the SETUP screen
- Word clock and slot settings
- Using cascade connections
- Basic settings for MIX buses and MATRIX buses
- Switching the entire phantom power supply on/ off
- Specifying the brightness of the touch screen, LEDs, channel name displays, and lamps
- Setting the date and time of the internal clock
- Setting the network address
- Initializing the unit to factory default settings
- Adjusting the detection point of the touch screen (Calibration function)
- Adjusting the faders (Calibration function)
- Fine-tuning the input and output gain (Calibration function)
- Adjusting the channel color (Calibration function)
- Adjusting the brightness of the channel name display
- Adjusting the contrast of the channel name display
- Dante audio network settings
- Using GPI (General Purpose Interface)
- Appendices
- EQ Library List
- DYNAMICS Library List
- Dynamics Parameters
- Effect Type List
- Effects Parameters
- Premium Rack Processor Parameters
- Effects and tempo synchronization
- Parameters that can be assigned to control changes
- NRPN parameter assignments
- Mixing parameter operation applicability
- Functions that can be assigned to USER DEFINED keys
- Functions that can be assigned to USER DEFINED knobs
- Functions that can be assigned to the assignable encoders
- MIDI Data Format
- Warning/Error Messages
- Electrical characteristics
- Mixer Basic Parameters
- M IDI Implementation Chart
- Index
Monitor and Cue functions
Reference Manual
103
4 CUE OUTPUT button
Switches the cue out on or off.
5 CLEAR CUE button
Cancels all cue selections simultaneously. If the CUE MODE setting is MIX CUE, all of the
selected channels will be cleared.
2. Press the CUE popup display button or the INPUT/DCA/OUTPUT CUE field to open
the CUE popup window.
The popup window includes the following items.
1 CUE MODE buttons
Select one of the following two cue modes:
• MIX CUE
All selected channels will be mixed and auditioned.
•LAST CUE
Only the most recently selected channel will be auditioned.
2 INPUT CUE field
This field enables you to make settings related to the input channel cue.
• Cue point select button
Sets the cue point to PFL (before fader (immediately before INPUT DELAY)), AFL (immediately
after fader), or POST PAN (immediately after PAN).
NOTE
Be aware that if you turn on the POST PAN button, you will be unable to monitor signals sent to
the MONO bus from an input channel in LCR mode.
• PFL TRIM knob
Indicates the monitor levels when PFL is selected. Use the multifunction knob to adjust the level.
3 DCA CUE field
This section enables you to make settings related to DCA cue.
• Cue point select button
Sets the cue point for the DCA group to PRE PAN (immediately before PAN) or POST PAN
(immediately after PAN).
• DCA TRIM knob
Indicates the monitor level of cue signals from a DCA group. Use the multifunction knob to adjust
the level.
•UNITY button
Turn on this button to monitor signals at the same volume level that was obtained when the
master level for each DCA group was set to 0 dB (unity gain).
4 OUTPUT CUE field
This section enables you to make settings related to output channel cue.
• Cue point select button
Sets the cue point for the output channel to PFL (immediately before fader) or AFL (immediately
after fader).
• PFL TRIM knob
Indicates the monitor levels when PFL is selected. Press this knob so that you will be able to use
the multifunction knob to adjust the level.
5 Meter field
•Meter
This field indicates the output level of the cue L/R channels.
• CUE OUT PATCH button
Press this button to open the PORT SELECT popup window, in which you can select an output
port to patch to the cue out L/R channels.
6 CUE OUTPUT button
Switches cue out on or off.
7 CUE LEVEL knob
Indicates the output level of the cue out. Use the multifunction knob to adjust the level.
8 ACTIVE CUE indicator
Lights to indicate the type of cue currently being monitored (input: blue, DCA: yellow, output:
orange).
9 CLEAR CUE button
Press this button to clear all cue selections simultaneously.
6
7
9
1 2 3 4 5
8