User Manual
Table Of Contents
- How to Use This Reference Manual
- Contents
- Function Tree
- SELECTED CHANNEL section
- Centralogic section
- Input and output patching
- Input channels
- Signal flow for input channels
- Specifying the channel name, icon and channel color
- Making HA (Head Amp) settings
- Sending a signal from an input channel to the STEREO/MONO buses
- Sending a signal from an input channel to a MIX/ MATRIX bus
- Correcting delay between channels (Input Delay)
- Channel library operations
- Output channels
- EQ and Dynamics
- Grouping and linking
- Scene memory
- About scene memories
- Using scene memories
- Editing scene memories
- Using the Global Paste function
- Using the Focus function
- Using the Recall Safe function
- Using the Fade function
- Outputting a control signal to an external device in tandem with scene recall (GPI OUT)
- Playing back an audio file that links to a scene recall
- Using Preview mode
- Monitor and Cue functions
- Talkback and Oscillator
- Meters
- Graphic EQ, effects, and Premium Rack
- I/O device and external head amp
- MIDI
- User settings (Security)
- Recorder
- Help function
- Other functions
- About the SETUP screen
- Word clock and slot settings
- Using cascade connections
- Basic settings for MIX buses and MATRIX buses
- Switching the entire phantom power supply on/ off
- Specifying the brightness of the touch screen, LEDs, channel name displays, and lamps
- Setting the date and time of the internal clock
- Setting the network address
- Initializing the unit to factory default settings
- Adjusting the detection point of the touch screen (Calibration function)
- Adjusting the faders (Calibration function)
- Fine-tuning the input and output gain (Calibration function)
- Adjusting the channel color (Calibration function)
- Adjusting the brightness of the channel name display
- Adjusting the contrast of the channel name display
- Dante audio network settings
- Using GPI (General Purpose Interface)
- Appendices
- EQ Library List
- DYNAMICS Library List
- Dynamics Parameters
- Effect Type List
- Effects Parameters
- Premium Rack Processor Parameters
- Effects and tempo synchronization
- Parameters that can be assigned to control changes
- NRPN parameter assignments
- Mixing parameter operation applicability
- Functions that can be assigned to USER DEFINED keys
- Functions that can be assigned to USER DEFINED knobs
- Functions that can be assigned to the assignable encoders
- MIDI Data Format
- Warning/Error Messages
- Electrical characteristics
- Mixer Basic Parameters
- M IDI Implementation Chart
- Index
Talkback and Oscillator
Reference Manual
107
3 INPUT TO TALKBACK field
• INPUT TO TALKBACK patch button
.......................... Press the button to open the PORT SELECT popup window, in
which you can patch a desired input port to an input port to
patch to talkback. The selected port name will appear on the
button.
• +48V indicator.......................... Indicates the on/off status of the +48V phantom power
supplied to the selected port.
• ANALOG GAIN knob ............. Sets the analog gain of the selected port. You can adjust the gain
by using the multifunction knobs.
• HA meter .................................... Displays the level of the HA input signal.
4 TALKBACK ASSIGN field
An indicator lights to indicate the currently-selected output destination of the talkback signal.
5 TALKBACK ON button
Switches talkback on or off.
2. Press the TALKBACK popup display button or the ASSIGN field to open the
TALKBACK popup window.
In this popup window you can make detailed settings for talkback.
1 TALKBACK IN field
• +48V button
Switches on or off the phantom power (+48V) supplied to the TALKBACK jack.
• TALKBACK level meter
Indicates the input level of the mic connected to the TALKBACK jack.
2 INPUT TO TALKBACK field
This field allows a mic connected to a conventional input port to be used as a talkback input.
• INPUT TO TALKBACK patch button
Press the button to open the PORT SELECT popup window, in which you can patch a desired
input port to talkback. The selected port name will appear on the button.
• +48V button
This is an on/off switch for the phantom power (+48V) supplied to the selected input port.
• ANALOG GAIN knob
Adjusts the analog gain setting for the selected input port. Press this knob so that you will be able
to use the multifunction knob to adjust the gain.
•HA meter
Indicates the input level of a mic connected to the selected input port.
• GC ON button
Turns the Gain Compensation (gain correction function) on or off. The button will appear if the
input jack of the I/O device is patched.
• Gain Compensation meter
Indicates the level after Gain Compensation. It will appear if the input jack of the I/O device is
patched.
NOTE
These parameters and meters will not appear if no input port is selected.
3 TALKBACK ON button
Switches talkback on or off.
4 ASSIGN field
• Channel select buttons
Enable you to select a channel (bus) on which the talkback signal is sent.
• CLEAR ALL button
Press this button to clear all selections.
3. Connect a mic to the TALKBACK jack on the front panel, and then rotate the
TALKBACK GAIN knob to adjust the input sensitivity of the mic signal.
The meter in the TALKBACK IN field indicates the input level of the mic connected to the
TALKBACK jack. If you want phantom power (+48V) to be supplied to the TALKBACK jack,
turn on the +48V button located in the TALKBACK IN field.
1 2
4
3