User Manual
Table Of Contents
- How to Use This Reference Manual
- Contents
- Function Tree
- SELECTED CHANNEL section
- Centralogic section
- Input and output patching
- Input channels
- Signal flow for input channels
- Specifying the channel name, icon and channel color
- Making HA (Head Amp) settings
- Sending a signal from an input channel to the STEREO/MONO buses
- Sending a signal from an input channel to a MIX/ MATRIX bus
- Correcting delay between channels (Input Delay)
- Channel library operations
- Output channels
- EQ and Dynamics
- Grouping and linking
- Scene memory
- About scene memories
- Using scene memories
- Editing scene memories
- Using the Global Paste function
- Using the Focus function
- Using the Recall Safe function
- Using the Fade function
- Outputting a control signal to an external device in tandem with scene recall (GPI OUT)
- Playing back an audio file that links to a scene recall
- Using Preview mode
- Monitor and Cue functions
- Talkback and Oscillator
- Meters
- Graphic EQ, effects, and Premium Rack
- I/O device and external head amp
- MIDI
- User settings (Security)
- Recorder
- Help function
- Other functions
- About the SETUP screen
- Word clock and slot settings
- Using cascade connections
- Basic settings for MIX buses and MATRIX buses
- Switching the entire phantom power supply on/ off
- Specifying the brightness of the touch screen, LEDs, channel name displays, and lamps
- Setting the date and time of the internal clock
- Setting the network address
- Initializing the unit to factory default settings
- Adjusting the detection point of the touch screen (Calibration function)
- Adjusting the faders (Calibration function)
- Fine-tuning the input and output gain (Calibration function)
- Adjusting the channel color (Calibration function)
- Adjusting the brightness of the channel name display
- Adjusting the contrast of the channel name display
- Dante audio network settings
- Using GPI (General Purpose Interface)
- Appendices
- EQ Library List
- DYNAMICS Library List
- Dynamics Parameters
- Effect Type List
- Effects Parameters
- Premium Rack Processor Parameters
- Effects and tempo synchronization
- Parameters that can be assigned to control changes
- NRPN parameter assignments
- Mixing parameter operation applicability
- Functions that can be assigned to USER DEFINED keys
- Functions that can be assigned to USER DEFINED knobs
- Functions that can be assigned to the assignable encoders
- MIDI Data Format
- Warning/Error Messages
- Electrical characteristics
- Mixer Basic Parameters
- M IDI Implementation Chart
- Index
Graphic EQ, effects, and Premium Rack
Reference Manual
116
• If nothing is mounted:
Press this area to open the RACK MOUNTER popup window, in which you can select the GEQ
or effect that will be mounted in the rack.
• If 31BandGEQ is mounted:
This area indicates the settings for each band, GEQ on/off status, and input/output level. Press this
area to open the GEQ EDIT popup window, in which you can modify the GEQ settings.
• If Flex15GEQ is mounted:
This area indicates the settings for each band, the GEQ on/off status, and the input and output
levels for A and B respectively. Press this area to open the GEQ EDIT popup window, in which
you can modify the GEQ settings for A and B.
• If an effect is mounted (EFFECT rack only):
This area indicates the effect type, number of inputs and outputs, bypass on/off status, and the
input/output level. Press this area to open the EFFECT EDIT popup window, in which you can
modify the effect settings.
7 Link indicator
Indicates that an odd-numbered rack and even-numbered rack of the 31BandGEQ, or A and B of
the Flex15GEQ are linked each other.
3. To mount a GEQ or effect in the rack, press the rack mount button for that rack.
The RACK MOUNTER popup window will appear.
1 Rack number
This indicates the number of the selected rack.
2 Virtual rack
This area indicates the GEQ or effect selected via the MODULE SELECT buttons.
3 MODULE SELECT
Use these buttons to select the GEQ or effect that will be mounted in the rack. Each button has
the following function.
• BLANK button ..........................Removes the GEQ or effect currently mounted in the rack; the
rack will be empty.
• 31BandGEQ button..................Mounts a 31BandGEQ in the rack.
• Flex15GEQ button.................... Mounts a Flex15GEQ in the rack.
• EFFECT button .........................Mounts an effect in the rack.
NOTE
Input/output patching will be defeated if you change the item mounted in a rack.
4 CANCEL button
Cancels the changes you made in the RACK MOUNTER popup window, and closes the window.
5 OK button
Applies the changes you made in the RACK MOUNTER popup window, and closes the window.
NOTE
• Be aware that if you remove a GEQ or effect that was mounted in a rack and close the window,
all edits to the parameter settings for that GEQ or effect will be discarded. If you have not yet
closed the window, you can recover the parameter settings by mounting the same GEQ or effect
once again.
• You can also display the RACK MOUNTER popup window by pressing a vacant rack in the GEQ/
EFFECT field.
7
43 5
21
43 5
21