User Manual
Table Of Contents
- How to Use This Reference Manual
- Contents
- Function Tree
- SELECTED CHANNEL section
- Centralogic section
- Input and output patching
- Input channels
- Signal flow for input channels
- Specifying the channel name, icon and channel color
- Making HA (Head Amp) settings
- Sending a signal from an input channel to the STEREO/MONO buses
- Sending a signal from an input channel to a MIX/ MATRIX bus
- Correcting delay between channels (Input Delay)
- Channel library operations
- Output channels
- EQ and Dynamics
- Grouping and linking
- Scene memory
- About scene memories
- Using scene memories
- Editing scene memories
- Using the Global Paste function
- Using the Focus function
- Using the Recall Safe function
- Using the Fade function
- Outputting a control signal to an external device in tandem with scene recall (GPI OUT)
- Playing back an audio file that links to a scene recall
- Using Preview mode
- Monitor and Cue functions
- Talkback and Oscillator
- Meters
- Graphic EQ, effects, and Premium Rack
- I/O device and external head amp
- MIDI
- User settings (Security)
- Recorder
- Help function
- Other functions
- About the SETUP screen
- Word clock and slot settings
- Using cascade connections
- Basic settings for MIX buses and MATRIX buses
- Switching the entire phantom power supply on/ off
- Specifying the brightness of the touch screen, LEDs, channel name displays, and lamps
- Setting the date and time of the internal clock
- Setting the network address
- Initializing the unit to factory default settings
- Adjusting the detection point of the touch screen (Calibration function)
- Adjusting the faders (Calibration function)
- Fine-tuning the input and output gain (Calibration function)
- Adjusting the channel color (Calibration function)
- Adjusting the brightness of the channel name display
- Adjusting the contrast of the channel name display
- Dante audio network settings
- Using GPI (General Purpose Interface)
- Appendices
- EQ Library List
- DYNAMICS Library List
- Dynamics Parameters
- Effect Type List
- Effects Parameters
- Premium Rack Processor Parameters
- Effects and tempo synchronization
- Parameters that can be assigned to control changes
- NRPN parameter assignments
- Mixing parameter operation applicability
- Functions that can be assigned to USER DEFINED keys
- Functions that can be assigned to USER DEFINED knobs
- Functions that can be assigned to the assignable encoders
- MIDI Data Format
- Warning/Error Messages
- Electrical characteristics
- Mixer Basic Parameters
- M IDI Implementation Chart
- Index
I/O device and external head amp
Reference Manual
141
3 DANTE SETUP button
Press this button to open the DANTE SETUP popup window, in which you can make settings for
the audio network.
■ HA display
This shows the HA settings of the I/O device. Press this area to open the I/O DEVICE HA popup
window, in which you can make detailed head amp settings.
4 Analog gain knob
Indicates the analog gain setting. This item is only for display, and cannot be edited.
5 +48V indicator
Indicates the phantom power (+48V) on/off status for each port.
6 OVER indicator
Warns you when the input signal is clipping.
7 HPF indicator
Indicates the high pass filter on or off status for each port.
■ INPUT display
This shows the input settings of the I/O device.
If you press the [SEL] key of an input channel, the corresponding port will light.
■ OUTPUT display
This shows the output settings of the I/O device. Press here to access the OUTPUT PATCH popup
window, where you can make output port settings for the I/O device.
If you press the [SEL] key of an output channel, the corresponding port will light.
2. To remotely control the head amp of an I/O device, press the I/O device in the HA
display.
The I/O DEVICE HA popup window will appear. In this window, you can remotely control the
head amp on the I/O device from the CL series console by using the on-screen knobs and buttons
or the multifunction knobs on the top panel.
1 +48V MASTER
Indicates the on/off status of the I/O device’s master phantom power. (Switching this on or off is
performed on the I/O device itself.)
2 +48V button
Switch phantom power on or off for each channel.
3 GAIN knob
Indicates the gain of the head amp on the I/O device. To adjust the value, press the knob to select
it, and use multifunction knobs 1–8. The level meter located immediately to the right of the knob
shows the input level of the corresponding port.
4 GC button
Switches on or off the Gain Compensation function that maintains a consistent signal level on the
audio network.
5 FREQUENCY knob/HPF button
These controllers switch on or off the high-pass filter built into the head amp of the I/O unit, and
adjust its cutoff frequency. If you press the FREQUENCY knob to select it, you will be able to
adjust it using the corresponding multifunction knob.
6 Displayed port switch tabs
These tabs switch the port that is displayed in the I/O DEVICE HA popup window.
7 GC ALL ON button/GC ALL OFF button
Switch Gain Compensation on or off for all input channels simultaneously.
5
7
4
6
2
3
4
5
6
7
1