User Manual
Table Of Contents
- How to Use This Reference Manual
- Contents
- Function Tree
- SELECTED CHANNEL section
- Centralogic section
- Input and output patching
- Input channels
- Signal flow for input channels
- Specifying the channel name, icon and channel color
- Making HA (Head Amp) settings
- Sending a signal from an input channel to the STEREO/MONO buses
- Sending a signal from an input channel to a MIX/ MATRIX bus
- Correcting delay between channels (Input Delay)
- Channel library operations
- Output channels
- EQ and Dynamics
- Grouping and linking
- Scene memory
- About scene memories
- Using scene memories
- Editing scene memories
- Using the Global Paste function
- Using the Focus function
- Using the Recall Safe function
- Using the Fade function
- Outputting a control signal to an external device in tandem with scene recall (GPI OUT)
- Playing back an audio file that links to a scene recall
- Using Preview mode
- Monitor and Cue functions
- Talkback and Oscillator
- Meters
- Graphic EQ, effects, and Premium Rack
- I/O device and external head amp
- MIDI
- User settings (Security)
- Recorder
- Help function
- Other functions
- About the SETUP screen
- Word clock and slot settings
- Using cascade connections
- Basic settings for MIX buses and MATRIX buses
- Switching the entire phantom power supply on/ off
- Specifying the brightness of the touch screen, LEDs, channel name displays, and lamps
- Setting the date and time of the internal clock
- Setting the network address
- Initializing the unit to factory default settings
- Adjusting the detection point of the touch screen (Calibration function)
- Adjusting the faders (Calibration function)
- Fine-tuning the input and output gain (Calibration function)
- Adjusting the channel color (Calibration function)
- Adjusting the brightness of the channel name display
- Adjusting the contrast of the channel name display
- Dante audio network settings
- Using GPI (General Purpose Interface)
- Appendices
- EQ Library List
- DYNAMICS Library List
- Dynamics Parameters
- Effect Type List
- Effects Parameters
- Premium Rack Processor Parameters
- Effects and tempo synchronization
- Parameters that can be assigned to control changes
- NRPN parameter assignments
- Mixing parameter operation applicability
- Functions that can be assigned to USER DEFINED keys
- Functions that can be assigned to USER DEFINED knobs
- Functions that can be assigned to the assignable encoders
- MIDI Data Format
- Warning/Error Messages
- Electrical characteristics
- Mixer Basic Parameters
- M IDI Implementation Chart
- Index
User settings (Security)
Reference Manual
173
Custom fader bank
Groups that organize channels routed to the top-panel faders are called “fader banks.”
There are input and output channel banks, as well as custom fader banks. Custom fader banks enable
you to select various combinations of channels, regardless of channel types. This section explains how
to set up a custom fader bank.
1. In the Function Access Area, press the SETUP button to access the SETUP screen.
2. Press the USER SETUP button to access the USER SETUP popup window.
3. Press the CUSTOM FADER tab to access the CUSTOM FADER BANK/MASTER FADER
page.
If you are logged-in as the Administrator, you can also turn on the FOR GUEST button in the
lower right of the screen to access the CUSTOM FADER BANK/MASTER FADER for Guest page,
and make custom fader bank settings for the Guest account.
This page includes the following items.
1 CUSTOM FADER BANK field
•Bank select buttons
Enable you to select a custom fader bank to which you want to assign a group of channels.
The number and name of the custom fader banks vary depending on the console model.
CL5: A1, A2, B1, C1, C2, C3, C4, C5, C6
CL3: A1, A2, A3, B1, B2
CL1: A1, B1, B2, B3, B4
2 MASTER FADER field
•MASTER button
Press this button to set channels that will be controlled by the faders in the Master fader section.
3 Block indicators
Display the graphics of the block and faders that are the current target for editing.
The graphics vary depending on the console model.
CL5: A (16 faders), B, C, MASTER
CL3: A (16 faders), B, MASTER
CL1: A (8 faders), B, MASTER
4 Fader select button
Selects the target fader. Press this button to select it, then press the [SEL] keys on the top panel to
add the corresponding channels to the selected fader bank.
5 Channel select popup button
Opens the channel select popup window, in which you can change the channel specified for
CHANNEL ASSIGN.
6 CLEAR ALL button
Clears the current fader bank assignment. Pressing this button will open a confirmation dialog
box. Press OK to clear the assignment. Otherwise, press CANCEL to return to the previous screen
without changing the setting.
4. Use the Bank Select keys to recall the fader settings to the top panel for the
channels you want to add to the custom fader bank.
5. Press the bank select button for the custom fader bank you
want to set up.
6. In the CHANNEL ASSIGN field, press the number button for
the fader you want to set up.
7. On the top panel, press the [SEL] key of the channel that you
want to assign to that fader number.
The name of the selected channel will appear on the channel select
popup button.
1
2
6
4
3
5