User Manual
Table Of Contents
- How to Use This Reference Manual
- Contents
- Function Tree
- SELECTED CHANNEL section
- Centralogic section
- Input and output patching
- Input channels
- Signal flow for input channels
- Specifying the channel name, icon and channel color
- Making HA (Head Amp) settings
- Sending a signal from an input channel to the STEREO/MONO buses
- Sending a signal from an input channel to a MIX/ MATRIX bus
- Correcting delay between channels (Input Delay)
- Channel library operations
- Output channels
- EQ and Dynamics
- Grouping and linking
- Scene memory
- About scene memories
- Using scene memories
- Editing scene memories
- Using the Global Paste function
- Using the Focus function
- Using the Recall Safe function
- Using the Fade function
- Outputting a control signal to an external device in tandem with scene recall (GPI OUT)
- Playing back an audio file that links to a scene recall
- Using Preview mode
- Monitor and Cue functions
- Talkback and Oscillator
- Meters
- Graphic EQ, effects, and Premium Rack
- I/O device and external head amp
- MIDI
- User settings (Security)
- Recorder
- Help function
- Other functions
- About the SETUP screen
- Word clock and slot settings
- Using cascade connections
- Basic settings for MIX buses and MATRIX buses
- Switching the entire phantom power supply on/ off
- Specifying the brightness of the touch screen, LEDs, channel name displays, and lamps
- Setting the date and time of the internal clock
- Setting the network address
- Initializing the unit to factory default settings
- Adjusting the detection point of the touch screen (Calibration function)
- Adjusting the faders (Calibration function)
- Fine-tuning the input and output gain (Calibration function)
- Adjusting the channel color (Calibration function)
- Adjusting the brightness of the channel name display
- Adjusting the contrast of the channel name display
- Dante audio network settings
- Using GPI (General Purpose Interface)
- Appendices
- EQ Library List
- DYNAMICS Library List
- Dynamics Parameters
- Effect Type List
- Effects Parameters
- Premium Rack Processor Parameters
- Effects and tempo synchronization
- Parameters that can be assigned to control changes
- NRPN parameter assignments
- Mixing parameter operation applicability
- Functions that can be assigned to USER DEFINED keys
- Functions that can be assigned to USER DEFINED knobs
- Functions that can be assigned to the assignable encoders
- MIDI Data Format
- Warning/Error Messages
- Electrical characteristics
- Mixer Basic Parameters
- M IDI Implementation Chart
- Index
Other functions
Reference Manual
196
Other functions
This chapter explains various functions of CL series consoles that are not covered in other chapters.
About the SETUP screen
The SETUP screen enables you to set various parameters that apply to the entire CL console. To access
the SETUP screen, press the SETUP button in the Function Access Area. The screen contains the
following items.
■ CURRENT USER field
This field enables you to make various user-related settings.
1 USER SETUP popup button
Press this button to open the USER SETUP popup window, in which you can make various
settings for each user.
2 CURRENT USER popup button
Press this button to open the LOG IN popup window, in which you can switch log-in users.
3 COMMENT EDIT popup button
Press this button to open the USER COMMENT EDIT popup window, in which you can enter
comments.
4 PASSWORD CHANGE popup button
Press this button to open the PASSWORD CHANGE popup window, in which you can change
the password.
5 SAVE KEY popup button
Enables you to save the user authentication key. Press this button to open the SAVE KEY popup
window. (see page 165)
■ STORAGE field
This field enables you to create, save, or load a user authentication key.
6 CREATE USER KEY popup button
Press this button to open the CREATE USER KEY popup window, in which you can create a new
user authentication key.
7 SAVE/LOAD popup button
Press this button to open the SAVE/LOAD popup window, in which you can save or load user
authentication keys and console files.
■ SYSTEM SETUP field
This field enables you to make various settings that globally apply to the CL console.
8 +48V MASTER button
Switches the console’s master +48V master phantom power on or off. If this button is off, phantom
power will not be supplied even if the +48V button of an OMNI jack input channel or
TALKBACK IN is on.
NOTE
This +48V MASTER setting does not affect the inputs of external racks such as DANTE inputs
(I/O devices). Each rack has a +48V MASTER switch, and will operate according to its setting.
9 WORD CLOCK/SLOT popup button
Press this button to open the WORD CLOCK/SLOT popup window, in which you can make word
clock settings and various settings for each slot.
0 CASCADE popup button
Press this button to open the CASCADE popup window, in which you can make patch settings
for cascade connections.
A OUTPUT PORT popup button
Press this button to open the OUTPUT PORT popup window, in which you can make output port
settings.
1 6 72543
8
E
F
9
C
A
0
G
D
B
H I J