User Manual
Table Of Contents
- How to Use This Reference Manual
- Contents
- Function Tree
- SELECTED CHANNEL section
- Centralogic section
- Input and output patching
- Input channels
- Signal flow for input channels
- Specifying the channel name, icon and channel color
- Making HA (Head Amp) settings
- Sending a signal from an input channel to the STEREO/MONO buses
- Sending a signal from an input channel to a MIX/ MATRIX bus
- Correcting delay between channels (Input Delay)
- Channel library operations
- Output channels
- EQ and Dynamics
- Grouping and linking
- Scene memory
- About scene memories
- Using scene memories
- Editing scene memories
- Using the Global Paste function
- Using the Focus function
- Using the Recall Safe function
- Using the Fade function
- Outputting a control signal to an external device in tandem with scene recall (GPI OUT)
- Playing back an audio file that links to a scene recall
- Using Preview mode
- Monitor and Cue functions
- Talkback and Oscillator
- Meters
- Graphic EQ, effects, and Premium Rack
- I/O device and external head amp
- MIDI
- User settings (Security)
- Recorder
- Help function
- Other functions
- About the SETUP screen
- Word clock and slot settings
- Using cascade connections
- Basic settings for MIX buses and MATRIX buses
- Switching the entire phantom power supply on/ off
- Specifying the brightness of the touch screen, LEDs, channel name displays, and lamps
- Setting the date and time of the internal clock
- Setting the network address
- Initializing the unit to factory default settings
- Adjusting the detection point of the touch screen (Calibration function)
- Adjusting the faders (Calibration function)
- Fine-tuning the input and output gain (Calibration function)
- Adjusting the channel color (Calibration function)
- Adjusting the brightness of the channel name display
- Adjusting the contrast of the channel name display
- Dante audio network settings
- Using GPI (General Purpose Interface)
- Appendices
- EQ Library List
- DYNAMICS Library List
- Dynamics Parameters
- Effect Type List
- Effects Parameters
- Premium Rack Processor Parameters
- Effects and tempo synchronization
- Parameters that can be assigned to control changes
- NRPN parameter assignments
- Mixing parameter operation applicability
- Functions that can be assigned to USER DEFINED keys
- Functions that can be assigned to USER DEFINED knobs
- Functions that can be assigned to the assignable encoders
- MIDI Data Format
- Warning/Error Messages
- Electrical characteristics
- Mixer Basic Parameters
- M IDI Implementation Chart
- Index
Other functions
Reference Manual
197
B MIDI/GPI popup button
Press this button to open the MIDI/GPI popup window, in which you can make MIDI and GPI-
related settings.
C DANTE SETUP button
Press this button to open the DANTE SETUP popup window. This window enables you to make
various audio network settings (console ID setting; SECONDARY PORT functionality setting;
audio bit rate; latency setting; selections for devices controlled via the I/O DEVICE screen).
■ BUS SETUP field
This field enables you to make bus-related settings.
D BUS SETUP popup button
Press this button to open the BUS SETUP popup window, in which you can make MIX bus/
MATRIX bus-related settings.
■ DATE/TIME popup button
Press this button to open the DATE/TIME popup window, in which you can set the date and time.
■ NETWORK popup button
Press this button to open the NETWORK popup window, in which you can set the network address.
■ Indicator field
This field displays various information about the console’s status.
E BATTERY indicator
Indicates the status of the internal battery.
NOTE
The LOW or NO indication will appear if the battery runs down. In this case, immediately contact
your Yamaha dealer or a Yamaha service center listed at the end of the operating manual
(separate document) to have the backup battery replaced.
F POWER SUPPLY indicator
Indicates the currently-running power supply: INT (internal) or EXT (PW800).
G Version indicator
Indicates the version number of the main CPU, sub CPU, and DANTE module.
■ CONSOLE LOCK button
This button executes the Console Lock function. If the console password has been set, pressing this
button will open the AUTHORIZATION popup window. Enter the correct password to execute
Console Lock.
If the console password has not been set, pressing this button will execute the Console Lock
immediately.
■ CONTRAST/BRIGHTNESS field
This field enables you to set the LCD brightness and contrast.
H BANK A/BANK B buttons
Select a bank to which you want to save the brightness and contrast settings. You can save two
different settings in bank A and B, and switch between them if desired.
I CONTRAST NAME knob
Adjusts the contrast of the channel name display.
J BRIGHTNESS NAME knob
Adjusts the brightness of the channel name display.
BRIGHTNESS CH COLOR knob
Adjusts the brightness balance of the channel color and the channel name display.
BRIGHTNESS SCREEN knob
Adjusts the brightness of the display.
BRIGHTNESS PANEL knob
Adjusts the brightness of the panel LEDs.
BRIGHTNESS LAMP knob
Adjusts the brightness of the lamp connected to the LAMP connector.