User Manual

ManualsBrandsYamaha ManualsPro-Audio InterfacesI / O frame

Table Of Contents

How to Use This Reference Manual
Contents
Function Tree
SELECTED CHANNEL section
- About the SELECTED CHANNEL section
- Operations in the SELECTED CHANNEL section
- SELECTED CHANNEL VIEW screen
Centralogic section
- About the Centralogic section
- Operations in the Centralogic section
- OVERVIEW screen
Input and output patching
- CL console internal patching and Dante audio network patching
- Changing the output patch settings
- Changing the input patch settings
- Inserting an external device into a channel
- Directly outputting an INPUT channel
- Recording or playing back using DAW on a computer
Input channels
- Signal flow for input channels
- Specifying the channel name, icon and channel color
- Making HA (Head Amp) settings
- Sending a signal from an input channel to the STEREO/MONO buses
- Sending a signal from an input channel to a MIX/ MATRIX bus
- Correcting delay between channels (Input Delay)
- Channel library operations
Output channels
- Signal flow for output channels
- Specifying the channel name, icon and channel color
- Sending signals from MIX channels to the STEREO/ MONO bus
- Sending signals from MIX channels and STEREO/ MONO channels to MATRIX buses
- Correcting delay between channels (Output Delay)
- Channel library operations
EQ and Dynamics
- About EQ and dynamics
- Using EQ
- Using dynamics
- Using the EQ or Dynamics libraries
Grouping and linking
- About DCA groups and Mute groups
- Using DCA groups
- Using mute groups
- Channel Link function
- Copying, moving, or initializing a channel
Scene memory
- About scene memories
- Using scene memories
- Editing scene memories
- Using the Global Paste function
- Using the Focus function
- Using the Recall Safe function
- Using the Fade function
- Outputting a control signal to an external device in tandem with scene recall (GPI OUT)
- Playing back an audio file that links to a scene recall
- Using Preview mode
Monitor and Cue functions
- About the Monitor and Cue functions
- Using the Monitor function
- Using the Cue function
- Operating the Cue function
Talkback and Oscillator
- About the Talkback and Oscillator functions
- Using Talkback
- Using the Oscillator function
Meters
- Operations in the METER screen
- Using an MBCL meter bridge (optional) on the CL3 or CL1 console
Graphic EQ, effects, and Premium Rack
- About the virtual rack
- Virtual rack operations
- Graphic EQ operations
- About the internal effects
- Using the Premium Rack
- Using the graphic EQ, effect, and Premium Rack libraries
I/O device and external head amp
- Using an I/O device
- I/O device patching
- Remotely controlling an Rio unit
- Remotely controlling an amp
- Using an external head amp
MIDI
- MIDI functionality on the CL series console
- Basic MIDI settings
- Using Program Changes to recall scenes and library items
- Using Control Changes to control parameters
- Using Parameter Changes to control parameters
User settings (Security)
- User Level settings
- Preferences
- USER DEFINED keys
- USER DEFINED knobs
- Assignable encoders
- Custom fader bank
- Master fader
- Console Lock
- Saving and loading setup data to and from a USB flash drive
- Formatting a USB flash drive
Recorder
- About the USB memory recorder
- Assigning channels to the input and output of the recorder
- Recording audio to a USB flash drive
- Playing back audio files from a USB flash drive
- Editing the title list
- Using the CL console with Nuendo Live
Help function
- Loading a Help file from a USB flash drive
- Loading a text file from a USB flash drive
- Viewing Help
- Using USER DEFINED keys to recall Help directly
Other functions
- About the SETUP screen
- Word clock and slot settings
- Using cascade connections
- Basic settings for MIX buses and MATRIX buses
- Switching the entire phantom power supply on/ off
- Specifying the brightness of the touch screen, LEDs, channel name displays, and lamps
- Setting the date and time of the internal clock
- Setting the network address
- Initializing the unit to factory default settings
- Adjusting the detection point of the touch screen (Calibration function)
- Adjusting the faders (Calibration function)
- Fine-tuning the input and output gain (Calibration function)
- Adjusting the channel color (Calibration function)
- Adjusting the brightness of the channel name display
- Adjusting the contrast of the channel name display
- Dante audio network settings
- Using GPI (General Purpose Interface)
Appendices
- EQ Library List
- DYNAMICS Library List
- Dynamics Parameters
- Effect Type List
- Effects Parameters
- Premium Rack Processor Parameters
- Effects and tempo synchronization
- Parameters that can be assigned to control changes
- NRPN parameter assignments
- Mixing parameter operation applicability
- Functions that can be assigned to USER DEFINED keys
- Functions that can be assigned to USER DEFINED knobs
- Functions that can be assigned to the assignable encoders
- MIDI Data Format
- Warning/Error Messages
- Electrical characteristics
- Mixer Basic Parameters
- M IDI Implementation Chart
- Index

Input and output patching

Reference Manual

INSERT/DIRECT OUT popup window (8ch)

1 Channel select button

Selects the channel to set. The channel icon, color, and number appear on the button.

2 INSERT OUT button

Press this button to open the PORT SELECT popup window, in which you can select an output

port. The name of the currently-selected port appears on the button.

3 INSERT ON/OFF button

Switches the insert on or off. The currently-specified insert point setting appears above the

button.

4 INSERT IN button

Press this button to open the PORT SELECT popup window, in which you can select an input

port. The name of the currently-selected port appears on the button. You can also view the insert-

in level by checking the indicator located to the right of the port button (that is displayed as an

option).

4. Access either the one-channel or the eight-channel INSERT/DIRECT OUT popup

window, and then press the INSERT OUT button.

The PORT SELECT popup window will appear, allowing you to select the output port used for

insert-out. The window includes the following items.

1 Category select list

Selects the category of output port shown in the popup window. The categories correspond to the

following output ports. They vary depending on the channel type.

• OMNI ..........................................OMNI1–OMNI8

• SLOT1 ......................................... SLOT1(1)–SLOT1(16)

• SLOT2 ......................................... SLOT2(1)–SLOT2(16)

• SLOT3 ......................................... SLOT3(1)–SLOT3(16)

• GEQ RACK ................................ GEQ1L(A)–GEQ16R(B) (MIX, MATRIX, STEREO, and

MONO channels only)

• EFFECT RACK..........................FX1L(A)–FX8R(B)

• PREMIUM RACK..................... PR1L(A)–PR8R(B)

2 Output port select buttons

These buttons assign the output port that will be used as insert-out for the currently-selected

channel.

NOTE

If a rack in which a GEQ or Premium Rack is mounted is specified as the insert-out or insert-in,

the other patch point will automatically be assigned to the same rack. Also, insert mode will

automatically be switched on. Additionally, if you defeat the insert-out or insert-in of a rack in

which a GEQ or Premium Rack is mounted, the other patch point will automatically be defeated

and at the same time insert mode will automatically be switched off.