User Manual
Table Of Contents
- How to Use This Reference Manual
- Contents
- Function Tree
- SELECTED CHANNEL section
- Centralogic section
- Input and output patching
- Input channels
- Signal flow for input channels
- Specifying the channel name, icon and channel color
- Making HA (Head Amp) settings
- Sending a signal from an input channel to the STEREO/MONO buses
- Sending a signal from an input channel to a MIX/ MATRIX bus
- Correcting delay between channels (Input Delay)
- Channel library operations
- Output channels
- EQ and Dynamics
- Grouping and linking
- Scene memory
- About scene memories
- Using scene memories
- Editing scene memories
- Using the Global Paste function
- Using the Focus function
- Using the Recall Safe function
- Using the Fade function
- Outputting a control signal to an external device in tandem with scene recall (GPI OUT)
- Playing back an audio file that links to a scene recall
- Using Preview mode
- Monitor and Cue functions
- Talkback and Oscillator
- Meters
- Graphic EQ, effects, and Premium Rack
- I/O device and external head amp
- MIDI
- User settings (Security)
- Recorder
- Help function
- Other functions
- About the SETUP screen
- Word clock and slot settings
- Using cascade connections
- Basic settings for MIX buses and MATRIX buses
- Switching the entire phantom power supply on/ off
- Specifying the brightness of the touch screen, LEDs, channel name displays, and lamps
- Setting the date and time of the internal clock
- Setting the network address
- Initializing the unit to factory default settings
- Adjusting the detection point of the touch screen (Calibration function)
- Adjusting the faders (Calibration function)
- Fine-tuning the input and output gain (Calibration function)
- Adjusting the channel color (Calibration function)
- Adjusting the brightness of the channel name display
- Adjusting the contrast of the channel name display
- Dante audio network settings
- Using GPI (General Purpose Interface)
- Appendices
- EQ Library List
- DYNAMICS Library List
- Dynamics Parameters
- Effect Type List
- Effects Parameters
- Premium Rack Processor Parameters
- Effects and tempo synchronization
- Parameters that can be assigned to control changes
- NRPN parameter assignments
- Mixing parameter operation applicability
- Functions that can be assigned to USER DEFINED keys
- Functions that can be assigned to USER DEFINED knobs
- Functions that can be assigned to the assignable encoders
- MIDI Data Format
- Warning/Error Messages
- Electrical characteristics
- Mixer Basic Parameters
- M IDI Implementation Chart
- Index
Input channels
Reference Manual
32
GAIN/PATCH popup window (8ch)
1 Channel select button
Indicates the channel icon, number, and name. When you press this button, the corresponding
channel will become a target for operations in the SELECTED CHANNEL section, and the
corresponding [SEL] key will light.
2 PATCH button
Press this button to display the PORT SELECT popup window to patch the input port to the input
channel.
3 +48V button
This button will appear for the input channel to which the head amp has been patched. Press the
button to switch phantom power (+48V) on or off.
NOTE
If the slot (for which the connection to the head amp is not recognized) is patched, the type of the
mini-YGDAI card will be displayed.
4 A.GAIN (analog gain) knob
Indicates the analog gain of the head amp. Press this knob so that you will be
able to use the multifunction knob to adjust the gain.
If the Gain Compensation function is turned on, an indicator will appear,
showing the position of the analog gain when the function is turned on.
5 Level meter
Indicates the input signal level.
6 GC (Gain Compensation) button
Switches the Gain Compensation function on or off for that channel.
7 Ø (Phase) button
Switches the phase of the input signal.
8 D. GAIN (digital gain) knob
Indicates the digital gain value. Press this knob so that you will be able to use the multifunction
knob to adjust the gain.
9 Digital gain meter
Indicates the level after digital gain.
GAIN/PATCH popup window
(1-48, 49-72/ST IN(CL5), 49-64/ST IN(CL3), ST IN(CL1))
This window displays the head amp settings of the corresponding input channels. Here you can also
adjust the head amp gain in groups of the selected eight channels by using the multifunction knobs in
the Centralogic section.
1 Parameter select buttons
Select one of the following parameters to view in the window.
• ANALOG GAIN........................ Analog gain
• DIGITAL GAIN ........................Digital gain
• PATC H ........................................ Patch selection
2 GC ALL ON/GC ALL OFF buttons
Switch Gain Compensation on or off for all input channels simultaneously.
3 Channel select button
Selects the channel. You can select multiple channels simultaneously.
1
2
3
4
5
9
6
7
8
12 12
3