User Manual
Table Of Contents
- How to Use This Reference Manual
- Contents
- Function Tree
- SELECTED CHANNEL section
- Centralogic section
- Input and output patching
- Input channels
- Signal flow for input channels
- Specifying the channel name, icon and channel color
- Making HA (Head Amp) settings
- Sending a signal from an input channel to the STEREO/MONO buses
- Sending a signal from an input channel to a MIX/ MATRIX bus
- Correcting delay between channels (Input Delay)
- Channel library operations
- Output channels
- EQ and Dynamics
- Grouping and linking
- Scene memory
- About scene memories
- Using scene memories
- Editing scene memories
- Using the Global Paste function
- Using the Focus function
- Using the Recall Safe function
- Using the Fade function
- Outputting a control signal to an external device in tandem with scene recall (GPI OUT)
- Playing back an audio file that links to a scene recall
- Using Preview mode
- Monitor and Cue functions
- Talkback and Oscillator
- Meters
- Graphic EQ, effects, and Premium Rack
- I/O device and external head amp
- MIDI
- User settings (Security)
- Recorder
- Help function
- Other functions
- About the SETUP screen
- Word clock and slot settings
- Using cascade connections
- Basic settings for MIX buses and MATRIX buses
- Switching the entire phantom power supply on/ off
- Specifying the brightness of the touch screen, LEDs, channel name displays, and lamps
- Setting the date and time of the internal clock
- Setting the network address
- Initializing the unit to factory default settings
- Adjusting the detection point of the touch screen (Calibration function)
- Adjusting the faders (Calibration function)
- Fine-tuning the input and output gain (Calibration function)
- Adjusting the channel color (Calibration function)
- Adjusting the brightness of the channel name display
- Adjusting the contrast of the channel name display
- Dante audio network settings
- Using GPI (General Purpose Interface)
- Appendices
- EQ Library List
- DYNAMICS Library List
- Dynamics Parameters
- Effect Type List
- Effects Parameters
- Premium Rack Processor Parameters
- Effects and tempo synchronization
- Parameters that can be assigned to control changes
- NRPN parameter assignments
- Mixing parameter operation applicability
- Functions that can be assigned to USER DEFINED keys
- Functions that can be assigned to USER DEFINED knobs
- Functions that can be assigned to the assignable encoders
- MIDI Data Format
- Warning/Error Messages
- Electrical characteristics
- Mixer Basic Parameters
- M IDI Implementation Chart
- Index
Input channels
Reference Manual
33
■ If you press the ANALOG GAIN parameter select button:
1 GAIN knob
Indicates the analog gain setting for each channel. Press this knob to control the gain value using
the multifunction knob. If the Gain Compensation function is turned on, an indicator will appear,
showing the position of the analog gain when the function is turned on.
2 OVER indicator
Lights when a signal at the input port or from the rack output exceeds the full scale level. This
indicator is available only if an input channel is selected.
3 +48V indicator
Indicates the +48V on/off status for each channel.
4 Ø (Phase) indicator
Indicates the phase setting for each channel.
NOTE
If the input channel is patched to a slot for which the connection to the head amp is not
recognized, the knob
1 will be replaced with the slot/port number of the patch destination. In
addition, the indicator
3 will not be displayed.
If the input channel is patched to the VIRTUAL RACK, the knob
1 will be replaced with the port
ID of the rack.
If nothing is patched to the input channel, the knob
1 will be replaced with a dotted line “----”.
■ If you press the DIGITAL GAIN parameter select button:
1 GAIN knob
Indicates the digital gain setting for each channel. Press this knob to control the gain value using
the multifunction knob.
2 OVER indicator
Lights when a signal at the input port or from the rack output exceeds the full scale level. This
indicator is available only if an input channel is selected.
3 Ø (Phase) indicator
Indicates the phase setting for each channel.
■ If you press the PATCH parameter select button:
1 PATCH button
Press this button to open the PORT SELECT popup window, in which you can select an input port
to patch to the channel.
4. Access either the 1ch or 8ch GAIN/PATCH popup window.
5. Use the on-screen buttons or the multifunction knobs to edit the head amp gain,
phase, and phantom power on/off settings.
NOTE
• The PAD will be switched on or off internally when the HA gain is adjusted between +17 dB and
+18 dB.
• Keep in mind that noise may be generated when using phantom power if there is a difference
between the Hot and Cold output impedance of an external device connected to the INPUT jack.
• The GAIN knob and +48V button are valid only on channels for which the assigned input port is
an INPUT jack on the I/O device, the OMNI IN on the CL unit, or a slot that is connected to an
external head amp device (e.g., Yamaha AD8HR or SB168-ES).
6. Perform the same operations for other input channels as desired.
If you are viewing the 1ch GAIN/PATCH popup window, you can also use the [SEL] keys to
switch the channel for editing.
If you are viewing the 8ch GAIN/PATCH popup window, you can use the Bank Select keys in the
Centralogic section to switch the channels being controlled in groups of eight.
7. When you finish editing, press the × symbol in the upper right of the window.
1
3
2
4
1
2
3
1