User Manual
Table Of Contents
- How to Use This Reference Manual
- Contents
- Function Tree
- SELECTED CHANNEL section
- Centralogic section
- Input and output patching
- Input channels
- Signal flow for input channels
- Specifying the channel name, icon and channel color
- Making HA (Head Amp) settings
- Sending a signal from an input channel to the STEREO/MONO buses
- Sending a signal from an input channel to a MIX/ MATRIX bus
- Correcting delay between channels (Input Delay)
- Channel library operations
- Output channels
- EQ and Dynamics
- Grouping and linking
- Scene memory
- About scene memories
- Using scene memories
- Editing scene memories
- Using the Global Paste function
- Using the Focus function
- Using the Recall Safe function
- Using the Fade function
- Outputting a control signal to an external device in tandem with scene recall (GPI OUT)
- Playing back an audio file that links to a scene recall
- Using Preview mode
- Monitor and Cue functions
- Talkback and Oscillator
- Meters
- Graphic EQ, effects, and Premium Rack
- I/O device and external head amp
- MIDI
- User settings (Security)
- Recorder
- Help function
- Other functions
- About the SETUP screen
- Word clock and slot settings
- Using cascade connections
- Basic settings for MIX buses and MATRIX buses
- Switching the entire phantom power supply on/ off
- Specifying the brightness of the touch screen, LEDs, channel name displays, and lamps
- Setting the date and time of the internal clock
- Setting the network address
- Initializing the unit to factory default settings
- Adjusting the detection point of the touch screen (Calibration function)
- Adjusting the faders (Calibration function)
- Fine-tuning the input and output gain (Calibration function)
- Adjusting the channel color (Calibration function)
- Adjusting the brightness of the channel name display
- Adjusting the contrast of the channel name display
- Dante audio network settings
- Using GPI (General Purpose Interface)
- Appendices
- EQ Library List
- DYNAMICS Library List
- Dynamics Parameters
- Effect Type List
- Effects Parameters
- Premium Rack Processor Parameters
- Effects and tempo synchronization
- Parameters that can be assigned to control changes
- NRPN parameter assignments
- Mixing parameter operation applicability
- Functions that can be assigned to USER DEFINED keys
- Functions that can be assigned to USER DEFINED knobs
- Functions that can be assigned to the assignable encoders
- MIDI Data Format
- Warning/Error Messages
- Electrical characteristics
- Mixer Basic Parameters
- M IDI Implementation Chart
- Index
Input channels
Reference Manual
41
Using the Centralogic section
You can use the multifunction knobs in the Centralogic section to adjust the send level of signals sent
from eight consecutive input channels to a specific MIX/MATRIX bus.
1. Make sure that an output port is assigned to each MIX/MATRIX bus to which you
want to send signals, and that your monitor system, external effect, or other device
is connected to the corresponding output port.
2. Use the Bank Select keys in the Centralogic section to access the OVERVIEW screen
that includes the input channel that you want to control.
In the OVERVIEW screen, you can use the TO MIX/TO MATRIX field to adjust the send levels
to the MIX/MATRIX bus.
3. Press the TO MIX/MATRIX SEND LEVEL knob for the desired send-destination MIX/
MATRIX bus.
A bold frame will appear around all TO MIX/MATRIX SEND LEVEL knobs for that MIX/
MATRIX bus.
4. Use multifunction knobs 1–8 to adjust the send level of signals sent from the (up
to) eight input channels to the selected MIX/MATRIX bus.
If necessary, you can use the Bank Select keys to switch the input channels that you want to assign
to the Centralogic section, and adjust the send levels from other input channels to the selected
MIX/MATRIX bus.
NOTE
If you want to monitor a signal being sent to a specific MIX/MATRIX bus, use the Bank Select
keys to assign the corresponding MIX channel to the Centralogic section, and then press the
[CUE] key for that MIX/MATRIX channel.
5. If you want to make detailed settings for MIX/MATRIX sends, press the TO MIX/
MATRIX SEND LEVEL knob inside the bold frame once again.
When you press the currently-selected TO MIX/MATRIX SEND LEVEL knob a second time, the
MIX SEND popup window or the MATRIX SEND popup window will appear. This window
includes the following items.
1 ALL PRE button
Sets the send point to “PRE.” (The send point is the point at which signals are sent from all send-
source channels — including the input and output channels — to the selected send destination.)
At this time, the PRE/POST button will light.
2 ALL POST button
Sets the send point to “POST.” (The send point is the point at which signals are sent from all send-
source channels — including the input and output channels — to the selected send destination.)
At this time, the PRE/POST button will turn off.
3 SEND FROM MODE button
Press this button to switch to the “SEND from 8ch” popup window.
4 Send destination indicator
Indicates the currently-selected send destination.
5 Send destination select buttons
Select MIX/MATRIX buses as the send destination.
14 42 3 1 2 3
0
8
7
6
5
0
9 9
8
7
6
5